Alternatives and similar repositories for imx585-v4l2-driver

Users that are interested in imx585-v4l2-driver are comparing it to the libraries listed below

• will127534 / imx294-v4l2-driver
  ☆52Updated last month
• will127534 / StarlightEye
  A IMX585 camera board designed for Raspberry Pi
  ☆217Updated 3 months ago
• will127534 / imx283-v4l2-driver
  ☆24Updated last month
• surgical-robots / cycx3_uvc_ov5640
  Firmware to drive Cypress CX3 camera controller
  ☆25Updated 8 years ago
• will127534 / OneInchEye
  A One Inch CMOS sensor (IMX283) camera board designed for Raspberry Pi
  ☆286Updated last year
• antmicro / hdmi-mipi-bridge
  Antmicro's open hardware HDMI into MIPI CSI-2 converter
  ☆99Updated last year
• will127534 / FourThirdsEye
  Open source Raspberry Pi 5 compatible Micro Four Thirds camera module based on IMX294
  ☆276Updated 3 months ago
• antmicro / m2-pcie-adapter
  Adapter card exposing M.2 (key-M) signals on PCIe x4 card edge socket.
  ☆40Updated last year
• InES-HPMM / FPD-LinkIII_Raspberry_HW
  FPD-Link III Hardware compatible with Raspberry Pi Camera and Raspberry Pi CSI connector.
  ☆50Updated 5 years ago
• Jana-Marie / OtterCam-s3
  Open source 1080p60Hz USB & IP camera based on Sochip s3 and OS05A10/OS05A20 (general MIPI CSI IP camera interface).
  ☆53Updated 2 years ago
• antmicro / google-coral-baseboard
  Antmicro's open hardware baseboard for the Google Coral i.MX8 + Edge TPU SoM
  ☆79Updated 2 years ago
• Hermann-SW / imx708_regs_annotated
  Reverse engineered annotated registers from Sony imx708 camera sensor
  ☆54Updated 2 years ago
• circuitvalley / Crosslink_NX_USB3_Boards
  This repo contains source, Documentation/reference PCB boards for USB3 camera interface with Lattice Crosslink NX FPGA
  ☆15Updated 3 years ago
• aewallin / One-Inch-Photodetector
  Photodiode transimpedance amplifier, on a one inch diameter circular PCB
  ☆21Updated last year
• danjulio / tCam
  Thermal imaging cameras based on the ESP32 and Lepton 3.5
  ☆127Updated last year
• antmicro / zynq-video-board
  Open Hardware carrier board supporting modules with Zynq 7000 All Programmable SoC devices.
  ☆60Updated 2 years ago
• jergling / MIPI-Spy
  Hardware tools for non-invasively sniffing MIPI D-Phy links.
  ☆24Updated 3 years ago
• timonsku / M.2-Card-Footprints
  Footprints and template for making your own M.2 devices
  ☆113Updated 2 months ago
• myriadrf / LimeSDR-Mini-v2
  LimeSDR Mini v2 Hardware Design
  ☆40Updated 6 months ago
• antmicro / cvbs-mipi-bridge
  ☆50Updated 7 months ago
• rriggs / kintex-7-stlv7325t-board-files
  ☆21Updated 2 years ago
• ArduCAM / Arducam-Pivariety-V4L2-Driver
  This driver is used for Arducam mipi camera with Pivariety board
  ☆48Updated 2 years ago
• m1geo / Pi5_PCIe
  A crude reverse engineering of the Pi5 PCIe connector & potential breakout boards.
  ☆80Updated last year
• OVGN / OpenIRV
  Open-source thermal camera project
  ☆58Updated 3 years ago
• yjdwbj / rp2040-uvc
  Capture video on your [Raspberry Pi Pico](https://www.raspberrypi.com/products/raspberry-pi-pico/) with a [tinyUSB](https://github.com/ha…
  ☆16Updated last year
• befinitiv / wifibroadcast
  ☆63Updated 5 years ago
• vankxr / icyradio
  Over-engineered SDR development board
  ☆45Updated 2 months ago
• ApotheoTech / Aper-Oculus
  An open-source Xilinx Kria SOM Carrier for high-speed camera design
  ☆28Updated last year
• m1geo / Pi5-Artix-FPGA-Hat
  An AMD/Xilinx Artix 50T FPGA on a Pi5 Hat with PCIe and GPIO interconnects as well as SPI programming
  ☆15Updated last year
• gautamz / mxm3-pcie-rise-connector
  A connector to bridge a MXM port and a standard PCIe port
  ☆13Updated 7 years ago