Alternatives and similar repositories for Lepton:

Users that are interested in Lepton are comparing it to the libraries listed below

• themainframe / leptonic
  A web GUI and several utilities for working with FLIR® Lepton® 3 LWIR camera modules.
  ☆50Updated 9 months ago
• groupgets / purethermal1-firmware
  Reference firmware for PureThermal 1 FLIR Lepton Dev Kit
  ☆132Updated 3 years ago
• cosmac / LePi
  LePi is a lightweight library for FLIR Lepton (2, 2.5 and 3) and Raspberry pi.
  ☆27Updated 7 years ago
• Myzhar / Lepton3_Jetson
  Library and examples to connect the FLIR Lepton3 thermal camera to Nvidia Jetson embedded boards
  ☆55Updated 2 years ago
• groupgets / pylepton
  Quick and dirty pure python library for interfacing with FLIR lepton
  ☆208Updated 3 years ago
• NachtRaveVL / Lepton-FLiR-Arduino
  Arduino Library for the Lepton FLiR Thermal Camera Module.
  ☆60Updated 2 years ago
• Myzhar / Lepton3_BBB
  A grabber for BeagleBone Blue to acquire thermal images from Lepton3 sensor
  ☆13Updated 4 years ago
• groupgets / purethermal1-uvc-capture
  USB Video Class capture examples for PureThermal 1 / PureThermal 2 FLIR Lepton Dev Kit
  ☆133Updated last year
• PX4 / Lepton
  FLIR Lepton ROS node
  ☆14Updated 9 years ago
• groupgets / GetThermal
  Cross-platform USB thermal camera viewer
  ☆242Updated last year
• josepbordesjove / FLiR-lepton
  Arduino application. This application captures an image with the FLiR Lepton and prints it.
  ☆37Updated 8 years ago
• groupgets / LeptonModule
  Code for getting started with the FLIR Lepton breakout board
  ☆321Updated 6 months ago
• marshalltaylorSFE / FlirPiCam
  An embedded linux flir lepton camera design package
  ☆27Updated 8 years ago
• mvduin / bbb-pin-utils
  Pin utilities for BeagleBone Black
  ☆38Updated 2 years ago
• NXPHoverGames / NXP-FMUMRT
  ☆12Updated 5 months ago
• peeyush-sharma / lepton_grabber
  A python script to grab images from multiple FLIR lepton sensor based purethermal boards.
  ☆16Updated 7 years ago
• patrickpoirier51 / OpenTracker
  ☆17Updated 7 years ago
• danjulio / lepton
  Code and libraries to use a FLIR Lepton Thermal Imaging Camera Module
  ☆187Updated last year
• JetsonHacksNano / installArduinoIDE
  Install the Arduino IDE on the NVIDIA Jetson Developer Kit.
  ☆26Updated 3 years ago
• DrYerzinia / RaspberryPiCamerav21
  Reversed schematic and PCB for Raspberry Pi Camera v2.1
  ☆14Updated 8 years ago
• adamjvr / ZyncMV
  ZyncMV is an open source machine/computer vision platform using the Xilinx Zync FPGA+ ARM Cortex A9 SoC
  ☆19Updated 8 years ago
• ArduCAM / Arducam-Pivariety-V4L2-Driver
  This driver is used for Arducam mipi camera with Pivariety board
  ☆41Updated 2 years ago
• gumstix / meta-gumstix
  Yocto BSP layer for Gumstix products.
  ☆17Updated 4 years ago
• danjulio / tCam
  Thermal imaging cameras based on the ESP32 and Lepton 3.5
  ☆113Updated 8 months ago
• StrawsonDesign / Robotics_Cape_Documentation
  Robotics Cape PCB Design Documentation
  ☆22Updated 7 years ago
• AlainPaillou / JETSONSKY
  ☆9Updated 2 weeks ago
• BeaglePilot / beaglepilot
  An autopilot for Linux-based computers based on the BeagleBone (Black)
  ☆110Updated 8 years ago
• sparkfun / Red_V
  The SparkFun RED-V RedBoard is a low-cost, development board featuring the Freedom E310 SoC which brings with it the RISC-V instruction s…
  ☆15Updated 5 years ago
• 6by9 / linux
  Raspberry Pi kernel. Please be aware that all these branches are likely to get rebased without warning.
  ☆26Updated this week
• FLIR / rawBoson
  RawBoson is a tool that implements Boson FSLP protocol over serial.
  ☆19Updated 3 years ago