vanepp / FritzingCheckPart

Related projects: ⓘ

• aminGhafoory / parametric-knob-maker
  A specifically made script for generating fully customizable knobs for making toolless hex screws
  ☆52Updated 2 years ago
• EmanuelBender / HEX_POD
  Multi-sensor intelligent environmental Monitor
  ☆15Updated 5 months ago
• baldengineer / Open-Vapors
  Open Source Reflow Oven Controller.
  ☆19Updated 2 years ago
• atar-axis / tc1-u4
  Alternative FW for U4 (STC15 8051 uC) on TransistorTester TC1
  ☆30Updated 10 months ago
• wagiminator / ATtiny814-Power-Analyzer
  Power Supply Analyzer with USB Interface
  ☆48Updated last year
• OLIMEX / Ultra-Sound-Levitation
  Ultra Sound Levitation board with two speakers and potentiometer
  ☆20Updated last year
• joao-pinheiro / atx_psu
  DYI ATX PSU
  ☆35Updated last year
• oxullo / uctester
  Ultimate Continuity tester
  ☆26Updated 4 years ago
• ArduinoHannover / ZPB30A1_Firmware
  Open-Source firmware for the ZPB30A1 electronic load (WIP)
  ☆49Updated 6 years ago
• wagiminator / ATtiny13-TinyRemoteXL
  12-Button IR Remote Control
  ☆42Updated last year
• c0pperdragon / HotPlate
  ☆30Updated 4 months ago
• wasspaul / sig_gen
  A simple cost-effective demo, test, training, board for an oscilloscope made from a Raspberry Pi Pico
  ☆55Updated 2 months ago
• beast-devices / ant2-usb-c-lipo-charger
  Tiniest USB-C LiPo charger
  ☆32Updated last year
• MarcelMG / DIY-Soldering-Station-Controller
  A soldering station controller compatible with Weller RT tips
  ☆39Updated 4 years ago
• itohio / ESPReflow
  ESP8266 reflow controller
  ☆22Updated 2 years ago
• MakingStuffChannel / DigitalCalipers
  Source code and other files for reading values from digital calipers. See the project page for complete write up at http://makingstuff.in…
  ☆35Updated 7 years ago
• aeonSolutions / AeonLabs-Solder-Reflow-Plate-PCB
  Solder Reflow Plate PCB
  ☆30Updated 7 months ago
• 0xPIT / AlClosure
  Beautiful Parametric Professional Aluminum Device Enclosure
  ☆29Updated 2 years ago
• SyedTahmidMahbub / q-dpico_picprog72
  Quick and dirty PIC16F72 programmer using the Raspberry Pi Pico and MicroPython
  ☆30Updated 8 months ago
• Nakazoto / Low-Voltage-Tube-Tester
  ☆21Updated 3 years ago
• RalphBacon / 230-Ultimate-Switch-Bounce-Eliminator
  Is this hardware solution the ultimate in switch bounce elimination? Simple PCB, cheap components = final solution!
  ☆11Updated 2 years ago
• MariusHeier / magik_solder_paste_stencil_box
  Is it magik? Or is it just a 3d printed box for holding your solder stencils with automatic lifting and vacuum hold down?
  ☆31Updated 2 years ago
• atc1441 / ATC_stc_solder_iron
  Custom firmware for cheap STC Based Soldering iron using PlatformIO and SDCC 8051 based
  ☆46Updated last year
• bobc / kicad-utils
  Various utilities for KiCad
  ☆18Updated 4 years ago
• Thor-x86 / arduino_cli
  I/O Testing or PC program <=> Arduino communication
  ☆30Updated 3 years ago
• zapta / misc
  Miscelenous
  ☆90Updated last month
• RoboticsBrno / RB0005-UniversalStepDown
  Universal step-down module
  ☆26Updated 3 years ago
• MagnusThome / Capacitive-Rainmeter
  Measure rain intensity in Homeassistant with a capacitive sensor
  ☆14Updated 8 months ago
• sleemanj / pcb-test-pattern
  A test pattern for checking your Homebrew PCB efforts.
  ☆22Updated 10 years ago
• jrsikken / ElectronicLoadR3
  Hardware of Jasper's Electronic Load R3
  ☆22Updated 5 years ago