Alternatives and similar repositories for pimoroni_11x7_display_in_gear_shifter

Users that are interested in pimoroni_11x7_display_in_gear_shifter are comparing it to the libraries listed below

• rallekralle11 / Epi_4L
  4 layer version of the Epi 32U4
  ☆57Updated last year
• upiir / arduino_gear_indicator
  Arduino UNO Gear Indicator for Manual Transmission using Hall Sensors
  ☆56Updated last year
• EmanuelBender / HEX_POD
  Multi-sensor intelligent environmental Monitor
  ☆17Updated last year
• upiir / pitch_roll_indicator
  Pitch and Roll indicator project using DFRobot Serial 6-Axis Accelerometer and 2x ESP32-S3-LCD-1.28 from Waveshare
  ☆38Updated 10 months ago
• VolosR / ResistorTTGO
  ☆44Updated 3 years ago
• Apehaenger / Another-HotPlate-Firmware
  A feature-rich reflow Hot-Plate firmware i.e. usable for "Tim's Hot Plate" (https://www.instructables.com/Tims-Hot-Plate/)
  ☆23Updated last month
• wagiminator / ATtiny13-TinyCandle
  Simple Candle Simulation
  ☆13Updated 2 years ago
• marcow1601 / UniFlow-SMD-Reflow-Controller
  Thermocouple based, ESP32 driven PID-controller software for SMD reflow soldering
  ☆23Updated 3 years ago
• upiir / diy_led_ring_light_arduino
  DIY 32 SMD 0402 LED Ring Light for Potentiometers and Rotary Encoders
  ☆34Updated last year
• bytesizedengineering / Solder-Reflow-Oven
  ☆41Updated last year
• upiir / arduino_round_lcd_display
  Arduino UNO with Round LCD IPS Display
  ☆65Updated last year
• upiir / arduino_temperature_gauge
  Arduino Temperature Gauge
  ☆45Updated 9 months ago
• polihedron / DIY-Reflow-Oven
  DIY Reflow Oven, mcu: STM32F103 dev board, Display: Nextion Basic 3.5", PID controller.
  ☆33Updated 3 years ago
• thelastoutpostworkshop / FastDisplayPrototyping
  Fast Display Prototyping using the Arduino IDE Serial Monitor for Adafruit GFX and TFT_eSPI
  ☆25Updated last month
• hpsaturn / cube_led_8x8x6_ws2812
  WS2812 LED 5050 RGB 8x8x6 LED cubic Matrix
  ☆29Updated 4 months ago
• itohio / ESPReflow
  ESP8266 reflow controller
  ☆24Updated 2 years ago
• connornishijima / SensoryBridge
  OSHW Advanced LED Audio Visualizer based around a hacky Discrete Fourier Transform
  ☆80Updated last year
• upiir / arduino_dashboard
  Car Dashboard using Arduino Leonardo, OBDII to UART adapter and Intelligent Nextion Display
  ☆29Updated 7 months ago
• aeonSolutions / AeonLabs-Solder-Reflow-Plate-PCB
  Solder Reflow Plate PCB
  ☆31Updated last year
• CarlBugeja / HeatStick
  A 10x10cm Flexible PCB Heater with an adhesive back
  ☆42Updated 3 years ago
• jfedor2 / magellan-spacemouse
  Adapter to use RS-232 Magellan/SpaceMouse with modern software
  ☆43Updated 2 years ago
• MariusHeier / magik_solder_paste_stencil_box
  Is it magik? Or is it just a 3d printed box for holding your solder stencils with automatic lifting and vacuum hold down?
  ☆34Updated 3 years ago
• strid3r21 / BeeS3
  Documentation and files for the Bee S3
  ☆65Updated last year
• DustinWatts / Pico-Matrix-Touch-Keyboard
  A touchscreen matrix using an 3.5" ILI9488 TFT with resistive touch and a Raspberry Pi Pico
  ☆52Updated 3 years ago
• CarlBugeja / Flexar-Driver
  ☆36Updated 2 years ago
• mcer12 / Nick-ESP8266
  Nick is a series of different Nixie clocks based on ESP8266.
  ☆41Updated 2 years ago
• ahmsville / Magnetic_rotary_encoding
  A library for setting up magnetic rotary encoding in C/C++ & MicroPython, The library also features a haptics controller which allows you…
  ☆122Updated 2 years ago
• axiometa / BrodBoost-PD
  Breadboard Powersupply with Power Delivery. Available Voltages 20,15,12,9,5. Based on CYPD3177 Chip
  ☆30Updated last month
• Makerfabs / MaTouch-ESP32-S3-Rotary-IPS-Display-with-Touch-2.1-ST7701
  ☆35Updated 3 months ago
• revk / ESP32-Generic
  Simple generic ESP32 based PCB design, ideally suited to battery use.
  ☆28Updated 4 months ago