bigunclemax / FocusIPCCtrlLinks
☆17Updated 3 years ago
Alternatives and similar repositories for FocusIPCCtrl
Users that are interested in FocusIPCCtrl are comparing it to the libraries listed below
Sorting:
- Firmware for canbus boxes☆105Updated last month
- Alternative Firmware for the chinese clone of ucds adapter which is available on aliexpress☆19Updated last year
- ☆42Updated 5 years ago
- Android CAN client☆61Updated 8 years ago
- ESP8266 based CAN-Bus Diagnostic Tool☆43Updated 3 years ago
- Firmware for the cheapest can sniffer☆38Updated last year
- Arduino firmware for Sardine CAN (Open Source J2534 device)☆84Updated 10 years ago
- Schematic, PCB and source code for a small Arduino-based controller to make Ford FDIM dash display useful again☆41Updated 4 years ago
- VOLVO Driver Distraction Display :)☆66Updated 3 years ago
- Reverse engineering of CANbus messages of Fiesta MK5 (restyling) dashboard/radio☆38Updated 4 years ago
- An Arduino sketch to read data from a CAN bus☆96Updated 6 years ago
- Arduino sketch to operate new PSA/Stellantis (Peugeot, Citroen, DS, Opel) comfort devices (CAN2010) on old BSI CAN-BUS (CAN2004)☆66Updated last month
- This repo for using your Arduino with MCP2515 CAN Interface and CANHacker software☆52Updated 4 years ago
- VAGCANLOGGER - KW1281 & VW TP 2.0☆33Updated 11 years ago
- A ESP32 based CAN interface for your webbrowser☆25Updated 4 years ago
- An ESP32 based BMS master for CAN based remote boards. Makes use of SimpBMS code for decoding the module data messages.☆15Updated 2 years ago
- An Arduino based LINBUS stack and signal interceptor/injector.☆193Updated 6 years ago
- ☆43Updated 3 years ago
- AVR alternative to vwcdpic HW+SW☆59Updated 3 years ago
- DS2 K-line library for Arduino and ESP32☆51Updated 4 months ago
- Arduino Uno powered OBD2 ECU Simulator 'Stand alone or qt5 GUI control'☆58Updated 5 years ago
- Volvo steering wheel buttons interface for Kenwood head unit☆28Updated 9 years ago
- FIS Control for the masses.☆48Updated 7 years ago
- An Arduino library for reading OBD-II data from your car over CAN bus☆45Updated last year
- Device based on Arduino to play with VAG KWP1281☆119Updated 7 years ago
- Van Protocol reader☆15Updated 6 years ago
- VAN - CAN protocol bridge (V2C) for cars made by PSA Group (Peugeot, Citroen)☆143Updated last week
- ELM327 based vehicle's CAN bus sniffer☆64Updated 6 years ago
- Arduino Due solution for adding vin-coded modules to BMW cars☆59Updated 6 years ago
- mcp2515 canbus module to Monitor Canbus traffic☆40Updated last year