Alternatives and similar repositories for CrumpSchemes

Users that are interested in CrumpSchemes are comparing it to the libraries listed below

• tylercrumpton / CrumpPrints.pretty
  KiCad repo for footprints I've made.
  ☆20Updated 4 years ago
• thexeno / HardWire-Arduino-Library
  A spinoff of the Arduino Wire library, implements a fully controllable I2C slave.
  ☆30Updated 4 years ago
• cpldcpu / TinyTouchButton
  A touch controlled light with 4xWS2812 RGB LEDs and ATtiny 10
  ☆34Updated 6 years ago
• PaulStoffregen / FreqMeasure
  Measures the elapsed time during each cycle of an input frequency.
  ☆74Updated 3 years ago
• per1234 / arduino-ci-script
  Bash script for continuous integration of Arduino projects
  ☆26Updated 4 years ago
• RalphBacon / ATTiny85_Fuse_Resetter
  Want to use all SIX GPIO pins on the ATTiny85? Now you can.
  ☆17Updated 7 years ago
• martonmiklos / EAGLE-libraries
  Collection of my libraries for the Autodesk EAGLE CAD tool
  ☆22Updated 4 years ago
• dasaki / nanoReflowController
  Reflow Oven Controller. See below for more information.
  ☆79Updated 6 years ago
• mattairtech / ArduinoCore-samd
  This is a fork from arduino/ArduinoCore-samd on GitHub. This will be used to maintain Arduino support for SAM D|L|C (M0+ and M4F) boards …
  ☆108Updated last year
• LordBlick / kicadPanelizer
  KiCAD PCB panelization helper
  ☆30Updated 4 years ago
• ZakKemble / millis
  Lightweight millisecond tracking library
  ☆44Updated 3 years ago
• baracudaz / usb-sht
  Project is to demonstrate AVR ATmega8 running V-USB stack communication with Sensirion SHT-1x Humidity and Temperature Sensor
  ☆16Updated 12 years ago
• benwis / SparkFun-Kicad-Libraries
  SparkFun libraries converted for use in KiCAD!
  ☆80Updated 9 years ago
• mike-rankin / ESP32_Pico
  ESP32 Pco D4 project with 0.66" Oled Display
  ☆54Updated 7 years ago
• SlashDevin / NeoHWSerial
  Arduino HardwareSerial with attachInterrupt for RX chars
  ☆49Updated 5 years ago
• Scavenger18 / RepoPNP
  Files concering PAIND PNP Feeder
  ☆24Updated 7 years ago
• adafruit / Adafruit_DAP
  port of free-DAP to standalone arduino
  ☆79Updated last year
• LowPowerLab / DualOptiboot
  Custom Optiboot to add wireless programming capability to Moteino
  ☆74Updated 5 years ago
• pkarsy / rcCalibrator
  Calibration of the internal RC oscillator of atmega328p chip, and UART bootloader(ATmegaBOOT) without crystal.
  ☆21Updated last year
• technoblogy / tiny-mega-i2c
  Minimal I2C master routines for the new AVR microcontrollers.
  ☆22Updated 3 years ago
• myelin / myelin-kicad-libraries
  Phil Pearson's KiCad component library
  ☆16Updated 8 years ago
• mike-rankin / ESP_trINKet
  ☆71Updated 7 years ago
• PaulStoffregen / KalmanFilter
  This is a Kalman filter used to calculate the angle, rate and bias from from the input of an accelerometer/magnetometer and a gyroscope.
  ☆14Updated 10 years ago
• adafruit / Adafruit_FRAM_I2C
  Arduino library driver for Adafruit's I2C-Based FRAM Breakouts
  ☆46Updated 2 years ago
• adafruit / Adafruit_FRAM_SPI
  Driver for Adafruit's SPI-Based FRAM Breakouts
  ☆36Updated last year
• Nullkraft / Keypad
  Matrix Keypad library for Arduino
  ☆60Updated last year
• WereCatf / Adafruit-PCD8544-Nokia-5110-LCD-library
  Arduino driver for PC8544, most commonly found in small Nokia 5110's
  ☆14Updated 8 years ago
• sumotoy / RA8875
  A library for RAiO RA8875 display driver for Teensy3.x or LC/Arduino's/Energia/Spark
  ☆83Updated 6 years ago
• Yveaux / RadioHead
  Git repository for RadioHead wireless networking library.
  ☆49Updated 10 months ago
• septillion-git / QC2Control
  Set the voltage of a Quick Charge 2.0 source via the Arduino.
  ☆68Updated 8 years ago