Alternatives and similar repositories for arducordermini:

Users that are interested in arducordermini are comparing it to the libraries listed below

• fredlllll / FredUtil-Arduino
  snippets that were too small for their own library
  ☆38Updated 6 years ago
• IdleHandsProject / POV_Fidget
  ☆52Updated 7 years ago
• FritzenLab / Fritzen_Proto-controller
  upload dos arquivos do Fritzen Proto, um compatível com Arduino UNO para protoboard
  ☆11Updated 8 years ago
• Miceuz / triac-bloc
  An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
  ☆50Updated 5 years ago
• adafruit / Adafruit-Feather-M0-Basic-Proto-PCB
  PCB files for the Adafruit Feather M0 Basic Proto
  ☆37Updated 3 years ago
• DPHAD / COGS-for-Makers
  A simple Cost-of-Goods Calculator for Makers to help identify what time and costs make up a product.
  ☆18Updated 7 years ago
• PaulStoffregen / FreqMeasureMulti
  Measures the elapsed time during each cycle of up to 8 input frequencies.
  ☆35Updated 3 years ago
• danasf / attiny_pixel_switch
  WS2811/12 patterns for ATtiny85 + switch!
  ☆56Updated 11 years ago
• Daandreev / LongboardMarkII
  Ground up, over-engineered electric longboard
  ☆23Updated 7 years ago
• alongruss / PCBArt_Eagle
  Converts an image brigthness values into PCB layers and outputs an Eagle .brd file.
  ☆26Updated 8 years ago
• jadonk / PocketBone
  Smalls mint tin sized BeagleBone
  ☆58Updated 8 years ago
• appfruits / Custom-Teensy
  This is a reference pcb and schematics for a custom Teensy 3.1 board in EAGLE CAD format. More info on this can be found in our blog post…
  ☆42Updated 9 years ago
• rocketscream / RocketScreamKicadLibrary
  Rocket Scream KiCad Library
  ☆19Updated 9 years ago
• electronut / ElectronutLabs-snapVCC
  A tiny 3.3 V / 5 V voltage regulator that snaps right on top of a 9 volt battery.
  ☆73Updated 5 years ago
• openenergymonitor / Hardware
  OpenEnergyMonitor Open Source Hardware
  ☆93Updated 6 years ago
• IdleHandsProject / PiZeroHub
  USB Hub specifically designed for the Raspberry Pi Zero.
  ☆34Updated 9 years ago
• psychogenic / SerialUI
  A Serial User Interface for embedded devices, namely Arduinos.
  ☆50Updated 5 years ago
• cnlohr / esplocalizer
  ESP8266 with IMU, Barometer and Battery
  ☆84Updated 6 years ago
• todbot / NeoJoints
  Neopixel Joints, millable on the Othermill
  ☆27Updated 7 years ago
• kanflo / espism
  A low cost ISM radio to wifi gateway
  ☆41Updated 5 years ago
• open-project / kicadlibrary
  bytelabs KiCad device and footprint library
  ☆46Updated 10 years ago
• IRNAS / koruza-pi
  KORUZA package for Raspberry Pi.
  ☆12Updated 8 years ago
• groupgets / c12666ma
  ☆24Updated last week
• mariolukas / openexposer
  Open Exposer - Hardware, Slicer, Host, Firmware
  ☆67Updated 8 years ago
• femtoduino / femto-usb
  FemtoUSB - ATMEL ARM Cortex M0+ (SAMD21), 256KB @ 48MHz, 3V3
  ☆60Updated 9 years ago
• OSHChip / OSHChip_V1.0_Docs
  Schematics, Gerbers, Bill of materials
  ☆34Updated 9 years ago
• sarinkhan / openWheel
  open source parametric wheels, tyres and tracks for robots meant for 3D printing
  ☆30Updated 4 years ago
• concretedog / 22mm_diameter_pcb_project
  ☆17Updated 7 years ago
• richardhawthorn / piZero-Hub
  A compact USB hub for the Raspberry Pi Zero
  ☆98Updated 8 years ago
• hzeller / rpt2paste
  Convert KiCAD rpt files to G-Code to dispense solder paste
  ☆24Updated 10 years ago