FIGLAB / High-Resolution-EIT
The high resolution Electrical Impedance Tomograph (EIT) project is provided for academic and non-commercial research. This project is based on our publication at ACM UIST 2016: https://dl.acm.org/doi/abs/10.1145/2984511.2984574
☆11Updated 4 years ago
Alternatives and similar repositories for High-Resolution-EIT
Users that are interested in High-Resolution-EIT are comparing it to the libraries listed below
Sorting:
- ☆53Updated 2 years ago
- Teensy3.2 (32 bit ARM Cortex-M4) configs AD5930 to output 100KHz sine wave☆12Updated 7 years ago
- Electrical Impedance Tomography PCB design☆84Updated 4 years ago
- This pulse oximetry shield from ProtoCentral uses the AFE4490 IC to enable your Arduino to measure heart rate as well as SpO2 values.☆50Updated 4 years ago
- Design of a Portable Impedance Tomography System☆10Updated 7 years ago
- IMU sensors on Arduino Nano 33 BLE Sense can be used in gesture recognition. Using machine learning, a model is trained using the data c…☆32Updated 5 years ago
- C++ Arduino sketch with quaternion output☆21Updated 4 years ago
- Vibrosight open-source project☆37Updated 5 years ago
- GUI for plotting/storing data from ProtoCentral breakouts☆21Updated last year
- ProtoCentral MAX86150 PPG and ECG chip breakout board Arduino libraries and Hardware☆34Updated last month
- This project is MAX3010x library for STM32F4☆30Updated 4 months ago
- Gesture recognition Deep Learning project for STM32 (based on Keras model)☆24Updated 5 years ago
- This project acquires the PDM (Pulse Density Modulation) microphone signal using SPI with software CIC(Cascaded Integrator-Comb) filter a…☆13Updated 7 years ago
- ☆22Updated 5 years ago
- uECG - very small wearable ECG device that sends raw and processed data over BLE☆72Updated 3 years ago
- Arduino based sensor learning project | MAX86150 | ECG | ESP8266☆14Updated 4 years ago
- MicroPython for M5Camera and OpenMV.☆11Updated 3 years ago
- M5Stack (ESP32) port of TensorFlow Lite for Microcontrollers demo "Magic Wand"☆13Updated 5 years ago
- An ADS1298 breakout board (8 channel ADC chip with SPI interface, meant for ECG and EEG)☆40Updated 6 years ago
- uECG device firmware - other parts of the project linked in description☆33Updated 2 years ago
- Arduino core for Maxim's MAX326xx series boards☆3Updated 8 months ago
- ☆15Updated 2 years ago
- AuraRing: Precise Electromagnetic Finger Tracking (IMWUT 2019)☆12Updated 5 years ago
- Data Sampling App from Serial to CSV file☆41Updated 3 years ago
- SMA-Q2_replacement_board☆29Updated 5 years ago
- Arduino Library for the ProtoCentral Pulse Express breakout board with MAX30102 and MAX32664D, used for measurement of Spo2, heartrate an…☆16Updated last month
- ☆30Updated 11 years ago
- Official Edge Impulse firmware for nRF52840 DK and nRF5340 DK☆31Updated last week
- Hack to turn a Logitech G402 Mouse into a Camera!☆42Updated 3 years ago
- Project on STM32☆25Updated 8 years ago