Alternatives and similar repositories for quad-serial-breakout

Users that are interested in quad-serial-breakout are comparing it to the libraries listed below

• PY1CX / Quad-Serial
  Quad serial project with FTDI CI's, Isolation and 1.8~5.5v UART port.
  ☆17Updated 7 years ago
• MacroFab / Macro_Articles
  Files for Articles written by MacroFab for the Engineering Blog.
  ☆19Updated 5 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆21Updated 6 years ago
• audiohacked / python-pyBusPirate
  Library for the Dangerous Prototypes Bus Pirate
  ☆39Updated 3 years ago
• texane / nrf
  nordic semiconductor wireless chipsets related code
  ☆43Updated 10 years ago
• kanflo / espism
  A low cost ISM radio to wifi gateway
  ☆41Updated 5 years ago
• newaetech / CANoodler
  CANoolder: CAN to 3.3V logic level interface. Dumb. Cheap. Simple. Pick 3.
  ☆13Updated 7 years ago
• wdim0 / esp8266_with_KeDei_lcd_module
  ESP8266 with 3.5" KeDei LCD module
  ☆43Updated 8 years ago
• PetteriAimonen / dso-quad-usb-analyzer
  USB Full-Speed (12Mbps) protocol analyzer for the DSO Quad
  ☆21Updated 12 years ago
• cadsoftcomputer / BBB-Wifi-Radio
  Internet Radio based on the Beaglebone Black platform
  ☆15Updated 9 years ago
• DangerousPrototypes / bus_pirate_ng
  Bus Pirate NG firmware and hardware
  ☆39Updated 2 years ago
• buserror / rf_bridge
  RF (433Mhz) to MQTT Bridge - with hardware
  ☆39Updated 7 years ago
• JamesNewton / DroidScriptBusPirate
  DroidScript for easier use of the BusPirate on your Android device.
  ☆44Updated 7 years ago
• FritzenLab / Fritzen_Proto-controller
  upload dos arquivos do Fritzen Proto, um compatível com Arduino UNO para protoboard
  ☆11Updated 8 years ago
• baoshi / KiCad
  KiCad libraries used by my projects
  ☆13Updated last year
• FireDeveloper / Fire-SCPI
  SCPI commands tools
  ☆37Updated 6 years ago
• carrotIndustries / energytrace-util
  Utility for reading EnergyTrace data from TI debug hardware
  ☆38Updated 3 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆35Updated 6 years ago
• Frans-Willem / CsrUsbSpiDeviceRE
  Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…
  ☆57Updated 11 years ago
• FPGA-Computer / USB-Snoop
  ☆12Updated 8 years ago
• slaff / esp8266.dev.box
  A Vagrant-powered virtual machine providing an isolated development environment for ESP8266.
  ☆21Updated 8 years ago
• DangerousPrototypes / Bus_Pirate_Ultra
  Just messing with an FPGA
  ☆25Updated 5 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• DangerousPrototypes / Downloads
  migrated from Dangerousprototypes google code "Downloads"
  ☆28Updated 6 years ago
• alvarop / silta
  ☆19Updated 2 years ago
• dmavromatis / mavroOBD
  Arduino (328P) based OBD port module
  ☆34Updated 9 years ago
• LibreSolar / 5uh-dc-lisn
  5uH DC LISN (-10 dB attenuation)
  ☆18Updated 6 years ago
• DangerousPrototypes / dangerous-prototypes-open-hardware
  Automatically exported from code.google.com/p/dangerous-prototypes-open-hardware
  ☆79Updated last year
• watterott / RPi-DPI-HAT
  Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi
  ☆18Updated 4 years ago
• greatscottgadgets / gsg-kicad-lib
  GSG's schematic symbols and modules for KiCad
  ☆51Updated last year