Alternatives and similar repositories for sputteringsystem:

Users that are interested in sputteringsystem are comparing it to the libraries listed below

• 0x23 / open-air-bearings
  Techniques and software to build, design and simulate air bearings
  ☆41Updated 6 months ago
• 0x23 / QuietAirCompressor
  A small and quiet air compressor design using 3D printed parts where possible.
  ☆66Updated last year
• alextreseder / picoEDM
  Minimalist DIY Wire EDM for Hobbyists & Education
  ☆45Updated 2 months ago
• computed-axial-lithography / OpenCAL
  Opensource CAL 3D printer with configuration flexibility based on commercially available optical components and 3D printed components. In…
  ☆115Updated this week
• benkrasnow / Fourier-ptycography
  Enhance resolution by capturing many images with off-axis illumination and combining in Fourier space. Adapted from https://github.com/W…
  ☆73Updated last month
• benkrasnow / MultiSpectLED
  Array of 15 1W LEDs spanning 280nm to 940nm
  ☆101Updated 4 months ago
• benkrasnow / Temperature_sensing_stirbar
  Schematics, PCB layout, and firmware for an RFID temperature sensor
  ☆156Updated 2 years ago
• kingoflolz / linear-actuator-hardware
  ☆60Updated 2 years ago
• michalin / Blu-ray-Laser-Scanning-Microscope
  3D printed laser scanning microscope from CD/DVD/Blu-ray pickup
  ☆85Updated 5 months ago
• TheDigital1 / powercore_plus
  This is a Pi Pico-SDK version of the Rack Robotics Powercore FW, with added features, support for GUI, and upgraded sensors
  ☆32Updated last year
• joshmaceachern / OSMMPump
  Open-Source Multichannel Microfluidics Pump. Developed as a research project to create a system that can precisely deliver fluids at a re…
  ☆11Updated 3 years ago
• marcoreps / multiinstrumentalist
  Multi instrument datalogging platform
  ☆83Updated last week
• Sindry-Manufacturing / rotoforge
  a repository for the rotoforge desktop, micro friction stir deposition based metal, plastic and ceramic 3D printer project
  ☆31Updated 4 months ago
• Rack-Robotics / Powercore-V2.0
  Open-Source wire EDM power supply by Rack Robotics, Inc.
  ☆148Updated 6 months ago
• ploopyco / pnp-feeder
  An automated feeder for pick and place machines.
  ☆154Updated 5 years ago
• Rack-Robotics / Powercore-V1.0-Hardware
  CAD & Electronics for Powercore V1
  ☆150Updated last year
• marcoreps / LTZmu
  Low cost 10V transfer standard
  ☆18Updated 2 years ago
• bhowiebkr / laser-level-webcam
  A tool for measuring height in microns of arbitrary sized objects using a webcam and a laser level.
  ☆156Updated last year
• XRobots / CycloidalDrive
  ☆188Updated last year
• CarlBugeja / PCB-Hot-Plate
  Reflowing PCBs with PCBs!
  ☆88Updated 3 years ago
• openpnp / openpnp-openbuilds
  An OpenPnP compatible SMT pick and place machine based on OpenBuilds linear motion components.
  ☆218Updated 7 years ago
• 0x23 / nmWave-Interferometer
  An Open Source Interferometer for Accurate Distance Measurements
  ☆20Updated last week
• MillerLabFTW / OpenSLS
  Open-source Selective Laser Sintering
  ☆273Updated 4 years ago
• Ennsye / CDT
  ☆79Updated 11 months ago
• computed-axial-lithography / CAL-hardware
  Hardware designs for a simple computed axial lithography apparatus (education, research and not-for-profit use)
  ☆63Updated 5 months ago
• roTechnic / EccentricCycloidalGears
  ☆28Updated 3 years ago
• Rack-Robotics / Powercore-V1.0-Manual
  Theory and operation of the Powercore V1 EDM PSU
  ☆47Updated last year
• bairdd / Zyrus-Etcher
  Zyrus STM Tip Etching Machine
  ☆23Updated last year
• hobbymachinist / els
  Electronic Leadscrew For Lathe
  ☆61Updated last year
• sphawes / fiber-laser-pcb-fab
  Instructions and settings for fabricating PCBs on a fiber laser, namely the xTool F1 Ultra
  ☆85Updated 3 months ago