Alternatives and similar repositories for teckit:

Users that are interested in teckit are comparing it to the libraries listed below

• curtisseizert / Nanovoltmeter
  A low noise nanovoltmeter design files and code
  ☆27Updated 11 months ago
• circuitvalley / agilent_53131A_53132A_options
  Source and Gerber Files for HP Agilent Keysight 53131A/53132A DIY upgrade published on www.circuitvalley.com
  ☆17Updated 2 years ago
• crteensy / FETProbe_tiny
  A tiny 1.3 GHz FET Probe
  ☆31Updated 2 years ago
• openscopeproject / HP34401a-OLED-HW
  HP34401a DMM OLED display mod hardware
  ☆27Updated 6 years ago
• PatrickBaus / SCAN2000
  Keithley 2000-SCAN solid-state relay replacement
  ☆10Updated 4 months ago
• Galvant / gpibusb-pcb
  PCB KiCAD project files
  ☆77Updated 10 years ago
• PhilippCo / meas_rpi
  Setup a Raspberry Pi for long term measurements
  ☆19Updated 8 months ago
• macaba / Nuts
  ☆13Updated last month
• circuitvalley / LM399_Voltage_reference
  Simple LM399 Voltage Reference board
  ☆23Updated 2 months ago
• curtisseizert / LowFreqLNA
  A 0.01Hz-1+MHz low noise amplifier
  ☆20Updated last year
• goopypanther / OpenFieldProbe
  EMC near-field probe designs
  ☆32Updated 4 years ago
• xyphro / HP3457-OLED-display
  A modern replacement for the low contrast HP3457 Multimeter LCD
  ☆28Updated 2 months ago
• hellange / poor-mans-smu
  ☆22Updated last year
• bvernoux / EMC_5uH_LISN
  Open Source Hardware Dual 5µH LISN(Line Impedance Stabilization Network)
  ☆22Updated last year
• NNNILabs / Multislope-3I
  Improved multislope ADC
  ☆23Updated 6 months ago
• MR-DOS / Si5351-lib
  Si5351 lib for STM32
  ☆58Updated 3 years ago
• jbtronics / DS1054_BodePlotter
  A Python program that plots Bode diagrams of a component using a Rigol DS1054Z and a JDS6600
  ☆36Updated 4 years ago
• openscopeproject / HP34401a-OLED-FW
  HP34401a DMM OLED display mod firmware
  ☆54Updated 3 years ago
• festlv / isc0901b0-breakout
  Simple breakout board for ISC0901B0 sensor
  ☆15Updated 3 years ago
• cellularmitosis / hp-03458-66509-clone
  A clone of the LTZ1000 reference board from the HP 3458A 8.5-digit multimeter
  ☆12Updated 7 years ago
• blinken / power-rail-probe
  Low-noise oscilloscope power rail probe
  ☆46Updated 7 months ago
• essele / yaugi
  Yet Another USB GPIB Interface
  ☆15Updated 5 years ago
• AndrewBCN / STM32-GPSDO
  An experimental GPSDO using an STM32 MCU and a u-blox Neo-M8 GNSS module.
  ☆79Updated 3 years ago
• jankae / SpectrumAnalyzer
  It started as some general experiments with RF stuff and gradually evolved into a (severely limited) spectrum analyzer.
  ☆40Updated 5 years ago
• Galvant / gpibusb-firmware-arm
  GPIB to USB adapter firmware for a Cortex M0 ARM microcontroller
  ☆33Updated 10 years ago
• Kofen / PoE_Ethernet_GPIB_Adapter
  ☆21Updated this week
• dmitrodem / tek_softhack
  Tecktronx MSO20xx/DPO20xx software hack for AppModules
  ☆26Updated 9 years ago
• joseluu / D6_firmware
  Firmware for the D6 Simple spectrum analyzer with tracking source (T.G.)
  ☆23Updated 5 years ago
• Rerouter / Multislope-ADC-PCB
  High Resolution Multi-slope ADC Kicad Files
  ☆13Updated 3 years ago
• jaromir-sukuba / J-SMU
  DIY source-measure unit
  ☆150Updated 3 years ago