Alternatives and similar repositories for PCBLaserDesktopApp:

Users that are interested in PCBLaserDesktopApp are comparing it to the libraries listed below

• paulusjacobus / SuperGerbil
  STM32 driven ARM Grbl firmware
  ☆23Updated 5 years ago
• jarekkt / step2mach
  Plugin for Mach3 and Nucleo-F429ZI board
  ☆16Updated 4 years ago
• terjeio / CNC_Breakout_Nucleo64
  CNC breakout for STM324F411 and ST32F446 development boards
  ☆20Updated last year
• ryannining / karyacontroller
  4 axis CNC, 3D, Laser Controller
  ☆59Updated 3 months ago
• openpnp / mica-feeder
  Automatic SMT Tape Feeder by Pham Thang
  ☆19Updated 7 years ago
• terjeio / PCBLaserMkII
  Mechanical and electrical design files for revised version of my PCB Laser exposer
  ☆16Updated 6 years ago
• mgineer85 / 0816-feeder-firmware
  Firmware for the 0816 automatic 3d printed smt feeder for OpenPnP.
  ☆33Updated 2 years ago
• bdring / Grbl_ESP32_Development_Controller
  A CNC controller to use and test Grbl_ESP32
  ☆76Updated 4 years ago
• SebG3D / TapePuller
  tape puller/remover for 0816 automatic feeder
  ☆21Updated 5 years ago
• uStepper / uStepperS
  ☆54Updated last year
• buildbotics / bbctrl-pcb
  Buildbotics CNC, 3D printer and other machine controller
  ☆48Updated 2 years ago
• bdring / PSoC_Grbl
  PSoc5 Port of Grbl CNC Controller
  ☆36Updated 7 years ago
• IRNAS / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆36Updated 8 years ago
• grblHAL / STM32F1xx
  grblHAL driver for ST STM32F1xx (Redpill, Bluepill)
  ☆50Updated this week
• martin2250 / GrblHeightProbe2
  PCB autolevelling toolchain for GRBL based CNCs
  ☆56Updated 7 years ago
• RaD / SolderPaste14M2
  Solder Paste Dispenser
  ☆18Updated 10 years ago
• fluidfred / powerlolu
  High Power Pololu Board based on A4989 - can be connected to RAMPS Pololu port
  ☆30Updated 10 years ago
• osresearch / servostep
  Closed loop servo control for stepper motors
  ☆10Updated 9 years ago
• langwadt / grbl_stm32
  grbl for stm32 with nucleo stepper drivers
  ☆33Updated 3 years ago
• briandorey / DIY-Pick-and-Place-Hardware
  CNC and design files for DIY pick and place machines, auto and manual versions
  ☆57Updated 10 years ago
• mgineer85 / sFeeder
  Parametric Feeder Design, load in OpenSCAD to make yours.
  ☆19Updated 9 months ago
• fugalster / Smart-BLDC-Commutator-Hardware
  ☆15Updated 10 years ago
• Alfrederson / cncstm32
  CNC Base for Blue Pill
  ☆16Updated 5 years ago
• drandrewthomas / ESP32_GRBL_CNC_Wireless_Pendant
  A wireless GRBL CNC pendant project based on the ESP32 micro-controller
  ☆48Updated 3 years ago
• ottoragam / Brushed-DC-Servo-Drive
  Low cost servo drive for small CNC machinery
  ☆54Updated 8 years ago
• makerbase-mks / MKS-SERVO57B
  MKS SERVO57B is 3d printer closed loop stepper motor NEMA23 MKS SERVO57 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆21Updated 3 years ago
• pointhi / HighPower-Mechaduino
  Mechaduino derivative which drives up to 10A, drawn using KiCad
  ☆29Updated 5 years ago
• Scavenger18 / RepoPNP
  Files concering PAIND PNP Feeder
  ☆23Updated 6 years ago
• BETZtechnik / ICEpick--Direct-drive-pick-and-place-head
  Pick and Place head with dual nozzles
  ☆39Updated 4 years ago
• Patrick-E-Rankin / Mach3Controller
  Android / ESP32 / ESP8266 Controller (+ coordinate display) for Mach3 CNC
  ☆17Updated 4 years ago