chethenry / pyOBDLinks
Fork from http://www.obdtester.com/pyobd, a OBD-II compliant car diagnostic tool.
☆35Updated 11 years ago
Alternatives and similar repositories for pyOBD
Users that are interested in pyOBD are comparing it to the libraries listed below
Sorting:
- Configurable heads up display fit for the Raspberry Pi☆47Updated 9 years ago
- OBD-2 library to read information from cars☆21Updated 12 years ago
- A scantool to read OBD2 info from cars.☆244Updated 2 years ago
- OpenXC Python library☆116Updated 3 years ago
- Python 2.7 - 3.5 interface to gpsd☆76Updated 8 years ago
- Fixes to pyobd for modern hardware interfaces☆90Updated 13 years ago
- Python code to drive a physical dashboard built with a Raspberry Pi, LED backpacks, and automotive gauges. See the full guide at: https:…☆13Updated 10 years ago
- ODBII graphic interface on a Raspberry Pi computer, using an ELM327 Bluetooth/USB device. Read and display engine data, OBDII Trouble Cod…☆298Updated 7 years ago
- Automotive data aquisition, logging, diagnostics, and visualization project. Focusing on CAN-bus and the Nissan 370Z☆81Updated 9 years ago
- A board that provides a serial interface with a vehicle's OBD-II bus.☆90Updated 6 years ago
- ArduiPi is a shield for Raspberry Pi that brings Arduino low level extented I/O to Raspberry Pi☆24Updated 11 years ago
- Mobile / Desktop App for CANBus Triple☆40Updated 9 years ago
- A fork of CANard with various tweaks and improvements implemented☆50Updated 6 years ago
- Offline Reverse Engineering Tools for Automotive Networks☆54Updated 2 years ago
- Vehicle OBD2 Shield Repository☆28Updated 12 years ago
- Fixes to pyobd for modern hardware interfaces☆466Updated 7 years ago
- Arduino TestSuite to automate Arduino unit tests☆16Updated 11 years ago
- Project to log CAN bus data from a PiCAN2 and a GPS module☆152Updated 4 years ago
- SocketCAN driver for UAB "8 devices" USB2CAN interface☆53Updated 3 years ago
- Subaru Select Monitor to Canbus adapter☆28Updated 7 years ago
- Open Hardware Data Logger☆21Updated 13 years ago
- OBD-II CAN adapter for Particle Electron, Photon, and RedBear Duo☆109Updated 6 years ago
- Reverse engineering vehicle CAN bus messages☆31Updated 7 years ago
- I2C Driver for Adafruit's PN532-based NFC Shield☆130Updated 9 years ago
- This is a small example sketch that simulates a cars ecu☆81Updated 5 years ago
- ELM327-compatible open-source OBD-II software☆35Updated 10 years ago
- A Python script to display data from a CAN bus☆255Updated 6 years ago
- Very simple tool for users who need to interface with a device based on CAN (CAN/CANopen/J1939/NMEA2000/DeviceNet) such as motors, sensor…☆57Updated 9 years ago
- Software for the CAN bus simulator on the Rasperry Pi☆70Updated 9 years ago
- Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.☆46Updated 6 years ago