Alternatives and similar repositories for ModbusSniffer

Users that are interested in ModbusSniffer are comparing it to the libraries listed below

• alerighi / modbus-sniffer
  A sniffer for the modbus protocol
  ☆64Updated last year
• Ekristoffe / ModbusSniffer
  Modbus RTU packet sniffer
  ☆18Updated 3 years ago
• budulinek / arduino-modbus-rtu-tcp-gateway
  Arduino-based Modbus RTU to Modbus TCP/UDP gateway with web interface. Allows you to connect Modbus RTU slaves (such as sensors, energy m…
  ☆201Updated 9 months ago
• tjhowse / modbus4mqtt
  Modbus TCP <-> MQTT glue. YAML configuration. Robust.
  ☆91Updated last week
• Xinyuan-LilyGO / T-CAN485
  ☆147Updated 3 months ago
• gmasse / esp-modbus-mqtt
  A Modbus RTU (RS-485) to MQTT Gateway (based on ESP32)
  ☆93Updated last year
• gituser-rk / orno-modbus-mqtt
  Read ORNO OR-WE-514 ModbusRTU energy meter via RS485 serial and publish values to MQTT broker
  ☆29Updated 5 years ago
• SmartEVSE / SmartEVSE-2
  Smart Electric Vehicle Charging Station (EVSE)
  ☆98Updated 4 months ago
• rscada / libmbus
  Meter-bus library and utility programs
  ☆250Updated 11 months ago
• ruuvi / ruuvi.firmware.c
  Ruuvi Firmware version 3. Built on top of Nordic SDK 15, uses both Ruuvi and external repositories as submodules.
  ☆64Updated last month
• favalex / modbus-cli
  Command line tool to access Modbus devices
  ☆210Updated 11 months ago
• gonium / gosdm630
  An interface for the Eastron SDM/Modbus smart meter series.
  ☆74Updated 6 years ago
• BlackZork / mqmgateway
  MQTT gateway for modbus networks
  ☆78Updated last month
• c3re / can2mqtt
  CAN-Bus -- MQTT bridge: bidirectional, configurable and extendable
  ☆100Updated last month
• OpenEVSE / open_evse
  Firmware for Open EVSE
  ☆142Updated last year
• volkszaehler / mbmd
  ModBus Measurement Daemon - simple reading of data from ModBus meters and grid inverters
  ☆274Updated this week
• mbs38 / spicierModbus2mqtt
  Modbus master which publishes via MQTT
  ☆67Updated 5 months ago
• LenShustek / M-NET-Sniffer
  Hardware and software to capture and decode the Mitsubishi M-NET HVAC protocol
  ☆50Updated 10 years ago
• Frankkkkk / python-pylontech
  Python lib to talk to pylontech lithium batteries 🔋 (US2000, US3000, ...) using RS485
  ☆83Updated 2 years ago
• Jakeler / bms-parser
  Binary protocol parser for the smart BMS from LTT Power
  ☆60Updated 3 years ago
• gavinying / modpoll
  A New Command-line Tool for Modbus and MQTT
  ☆139Updated last month
• OpenEVSE / OpenEVSE_PLUS
  OpenEVSE Hardware
  ☆201Updated 10 months ago
• pwitab / iec62056-21
  A Python library for IEC62056-21, Local Data Readout of Energy Meters. Former IEC1107
  ☆81Updated 3 years ago
• epsilonrt / mbpoll
  command line utility to communicate with ModBus slave (RTU or TCP)
  ☆371Updated 6 months ago
• lvzon / dsmr-p1-parser
  Ragel-based C-parser for Dutch Smart Meter P1-data (and similar IEC 62056-21 telegrams)
  ☆58Updated last year
• SmartEVSE / smartevse
  Smart EVSE Electric Vehicle Charging Station
  ☆99Updated 4 years ago
• ganehag / pyMeterBus
  Pure Python implementation of the Meter-Bus (M-Bus EN13757-3) protocol.
  ☆93Updated last month
• Tom-evnut / SimpBMS
  SimpBMS Documentation
  ☆91Updated 3 years ago
• harihanv / esp32-modbus-gateway
  esp32 port of modbus RTU to TCP Arduino gateway
  ☆71Updated 4 years ago
• qqqlab / DALI-Lighting-Interface
  Digital Addressable Lighting Interface (DALI) for microcontrollers
  ☆56Updated 4 years ago