roberreiter / StiebelEltron-heatpump-over-esphome-can-bus
ESPhome-configuration to read and write values on a Stiebel Eltron heat pump
☆21Updated last year
Related projects: ⓘ
- An ESPhome / Home Assistant configuration to monitor & configure Stiebel Eltron Heating Pumps via a CAN Interface☆23Updated this week
- go-eCharger integration for Home Assistant using the MQTT API☆83Updated this week
- Custom component for home assistant supporting openWB wallbox☆36Updated 2 months ago
- Advanced Blueprints combined with pyscript for extra useful automations☆163Updated last month
- Home Assistant integration for evcc☀️🚘- optimized charging of electric vehicles, connecting your EV charger with your PV system. The int…☆48Updated this week
- Hass.io add-on for EVCC☆88Updated last week
- ☆13Updated last week
- ☆86Updated last year
- Home Assistant custom_component for controlling the go-eCharger EV-Charger☆89Updated last month
- The Home Assistant Add-on for EMHASS: Energy Management Optimization for Home Assistant☆88Updated last month
- A power distribution card inspired by the official Energy Distribution card for Home Assistant☆166Updated 11 months ago
- Adds EPEX Spot data to Home Assistant.☆137Updated 2 months ago
- Interact with Zehnder Comfoair with esp32☆123Updated 2 months ago
- Home Assistant customcomponent for SunSpec modbus devices☆63Updated 3 weeks ago
- Integration for Home Assistant to fetch data from the victron gx device via modbusTCP☆173Updated 2 months ago
- Local/LAN Tibber Pulse IR/Bridge Integration for Home Assistant. My Tibber invitation Link: https://invite.tibber.com/6o0kqvzf (Code: six…☆89Updated last week
- Python 3 Interface for Home Assistant to interact with HomeMatic devices☆130Updated this week
- ☆41Updated last week
- Multimatic integration for Home Assistant (also compatible with sensoAPP)☆137Updated 6 months ago
- Esphome component for Deye 3 phase inverters for Home Assistant☆129Updated 4 months ago
- esphome external component to support meters with OBIS D0 interface☆44Updated 6 months ago
- An ESP32 based 8 channels motor controller (to replace Homematic IP Floor Heating Actuator)☆89Updated 2 months ago
- Sonoff NSPanel protocol and hacking information. Tasmota Berry driver for NSPanel☆129Updated last month
- Integrate your Zendure products (Hub 1200, Hub 2000, Hyper 2000 and Ace 1500) into Home Assistant via MQTT. My attempt at instructions.☆43Updated 3 weeks ago
- Hassio Addon packaging modus-proxy☆34Updated 9 months ago
- External components for ESPHome☆29Updated last year
- connects E3 (vcal, vdens, vx3...) controller through can uds or doip☆88Updated this week
- A Lovelace Card for visualizing power distributions.☆213Updated 2 months ago
- MQTT Client that publishes data from Volkswagen WeConnect☆67Updated last week
- SolaX Power Modbus custom_component for Home Assistant (Supports some Ginlong Solis, Growatt, Sofar Solar, TIGO TSI & Qcells Q.Volt Hyb)☆313Updated this week