riscv-mcu / gd32-dfu-utils
Dfu-utils GD32 fork.
☆42Updated 4 years ago
Related projects ⓘ
Alternatives and complementary repositories for gd32-dfu-utils
- Longan RV32 Boards Document☆48Updated 4 years ago
- Fork of OpenOCD that has RISC-V microcontroller support☆35Updated 4 months ago
- example project for Longan Nano (GD32VF)☆85Updated 4 years ago
- ☆42Updated 3 years ago
- The directory to save Bumblebee core's documents, just for GD32VF103 RISC-V Core☆40Updated 3 years ago
- Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.☆69Updated last year
- The directory to save the GD32VF103 relevant Boards' documents☆15Updated 4 years ago
- CH552 Dual USB to Serial Bridge.☆76Updated 3 months ago
- The directory to save GD32VF103 Demo_Suites☆33Updated 4 years ago
- M1s(BL808)SDK☆57Updated last year
- RV-Link: In application debugger for RISC-V micro-controllers, RISC-V emulator, running on RISC-V development boards (e.g. Sipeed Longan …☆25Updated 3 years ago
- Mainline-friendly SPL for D1☆34Updated 2 years ago
- An USB to Serial bridge based on CH55x series MCU.☆22Updated 3 months ago
- GD32V: development platform for PlatformIO☆183Updated last year
- Datasheets and Reference Manual for BL602/BL808☆142Updated last year
- GNU toolchain for RISC-V, including GCC. Tweaked for microcontrollers.☆27Updated 4 months ago
- kflash, A Python-based cross-platform Kendryte K210 UART ISP Utility☆94Updated 3 years ago
- Hardware Abstract Layer for BL602 RISC-V WiFi + BLE SoC in embedded Rust☆75Updated 10 months ago
- Hardware abstract layer (HAL) `embedded-hal` for RISC-V microcontroller GD32VF103 in Rust. Contributions welcomed!☆62Updated 2 years ago
- Longduino is an Arduino port for gd32v mcu.☆69Updated 2 years ago
- Single-chip solution for Hi-speed USB2.0(480Mbps) JTAG/SPI Debugger based on RISC-V MCU CH32V30x/CH32V20x☆96Updated last year
- a cheap CMSIS-DAP debugger by an WCH chip named CH549F☆45Updated 3 years ago
- Opensource embedded controller firmware for sipeed boards.☆33Updated 5 years ago
- ECPDAP allows you to program ECP5 FPGAs and attached SPI flash using CMSIS-DAP probes in JTAG mode.☆59Updated last year
- USB to UART bridge for GD32VF103☆28Updated 4 years ago
- Tang-Nano-examples☆63Updated 3 years ago
- Nuclei: development platform for PlatformIO☆12Updated 4 months ago
- OpenBouffalo Firmware Repository☆33Updated last year
- Minimal code for a 'bare metal' ESP32 program which does not use ESP-IDF. Really just a learning exercise because the ESP-IDF is Apache-l…☆42Updated 5 years ago
- CH55x USB to JTAG bridge☆125Updated 3 months ago