rileycoyote87 / DJI-Ronin-RS2-Log-and-Replay
based on the Ronin SDK this simple two script python setup reads and logs gimbal yaw, roll, pitch, and focus position, and then can replay it
☆39Updated 2 years ago
Alternatives and similar repositories for DJI-Ronin-RS2-Log-and-Replay:
Users that are interested in DJI-Ronin-RS2-Log-and-Replay are comparing it to the libraries listed below
- ☆26Updated 2 years ago
- ☆68Updated 3 years ago
- Ronin-S CAN protocol debug.☆12Updated 3 years ago
- An Open Source SMPTE Linear Timecode Generator Based on ATmega328P(Arduino UNO).☆60Updated 2 years ago
- Arduino ESP32 Library for connecting to Blackmagic Cameras using Bluetooth Low Energy.☆97Updated 6 months ago
- SMPTE/LTC decoder for Teensy 3.2 microcontroller audio shield☆23Updated 3 years ago
- Professional level DIY Camera Motion Control System☆92Updated 3 months ago
- Pelco D PTZ Camera Control for Arduino☆19Updated 4 years ago
- Linear Timecode Generator for ESP32☆12Updated 4 years ago
- hacked library and test sketch for controlling blackmagic micro cameras from an arduino over sbus☆43Updated 6 years ago
- Hardware implementation controlling the shutter of any Sony camera with a multiport connector☆38Updated last year
- BluMagx - Bluetooth Remote Controller for Blackmagic Design cameras☆11Updated 4 years ago
- A simple freeD tracking protocol implementation written in golang☆18Updated last year
- ESP32 based SMPTE/EBU timecode generator, with NTP slaving, for Leitch and similar studio/broadcast clocks.☆51Updated last year
- An open-source camera control hand-wheels project based on the Kino Wheels project.☆10Updated 4 years ago
- A SBUS to USB-Joystick converter for ATMega32u4-based arduinos☆9Updated 7 years ago
- ☆81Updated 3 months ago
- Allows simultaneous control of up to 8 GoPro cameras☆18Updated last month
- This is DCTL which can make precise correction of the fisheye lens.☆32Updated last year
- Arduino based LANC to serial☆16Updated 8 years ago
- Collection of software components for development of open source cinema camera using raspberry pi hardware and software.☆50Updated 5 months ago
- Wi-Fi Remote for Sony Cameras☆145Updated last year
- A SMTPE video timecode library for Python☆13Updated 2 years ago
- 3D Printed 3 Axis Camera Slider, remote controlled via Bluetooth☆27Updated 3 years ago
- Control a Pelco Cmaera with Arduino and RS485☆20Updated 9 months ago
- ☆20Updated 3 years ago
- Controlling the Z CAM E1 through its I/O port.☆17Updated 5 years ago
- Tilta Nucleus N reverse engineering☆23Updated 4 years ago
- OpenSAM by OHM - 3D Printed Camera Stabilizer☆54Updated 7 years ago
- 3 Axis Kino wheels to command a DJI Ronin via SBUS protocol using Arduino boards.☆10Updated 3 years ago