Alternatives and similar repositories for SMPTE-EBU-TimecodeGenerator-ESP32

Users that are interested in SMPTE-EBU-TimecodeGenerator-ESP32 are comparing it to the libraries listed below

• vanvught / h3dmx512-zip
  Images for Allwinner H2+/H3 DMX512 / RDM / Art-Net / sACN / USBPro / Pixel / WS28xx / TCNet / SMPTE
  ☆89Updated 6 months ago
• lydasia / openltc
  An Open Source SMPTE Linear Timecode Generator Based on ATmega328P(Arduino UNO).
  ☆65Updated 3 years ago
• claud9999 / lutoc
  Linear Timecode Generator for ESP32
  ☆12Updated 4 years ago
• ArtScienceLab / ARDUINO_LTC_DECODER
  SMPTE/LTC decoder for Teensy 3.2 microcontroller audio shield
  ☆24Updated 3 years ago
• FrankBoesing / LinearTimecode-Decoder
  LTC decoder for Teensy Audio Library
  ☆31Updated 5 years ago
• wasn-eu / vTally
  vTally - Wireless Tally and VISCA converter for vMix
  ☆16Updated 3 years ago
• OpenLightingProject / ja-rule
  Ja Rule is the code behind OLE, an Open Source DMX/RDM framework for PIC32 microcontrollers
  ☆51Updated 4 years ago
• OpenLightingProject / rp2040-dmxsun
  RP2040-based USB DMX dongle with integrated web server
  ☆114Updated 4 months ago
• jeremywillden / visca-stick
  USB Joystick control of VISCA-compatible PTZ video cameras
  ☆13Updated 9 months ago
• foxworth42 / arduino-VISCA-controller
  Arduino based VISCA controller for Cisco TelePresence Precision series of cameras
  ☆27Updated 4 years ago
• voc / aes67-recorder
  A Linux/GStreamer-Based AES67 Multitrack Audio Backup Solution
  ☆102Updated 6 years ago
• lplassman / V4L2-to-NDI
  A video input (V4L2) to NDI converter that works with Raspberry Pi (32-bit and 64-bit), and Intel/AMD CPUs
  ☆90Updated 6 months ago
• rpitv / atem-tally
  Node.js ATEM tally interface built to run on a Raspberry Pi over XLR cables
  ☆23Updated last year
• xn--nding-jua / UltranetReceiver
  A FPGA-based receiver for Behringers Ultranet (X32, P16-I, P16-M, etc.)
  ☆97Updated 9 months ago
• utopiantools / visca-ip-proxy-arduino
  Uses a WiFi enabled microcontroller to proxy VISCA commands from UDP to RS-232 and vice versa.
  ☆15Updated 4 years ago
• matiaspl / LinkPi-ENCx
  ☆71Updated last week
• matiaspl / intercom
  A githubbed version of DIY production intercom system based on Mumble voice chat server and headless client running on Raspberry Pis.
  ☆64Updated last year
• International-Anglican-Church / visca-joystick
  A simple python app for connecting a gaming controller to a VISCA over IP camera
  ☆26Updated 4 months ago
• jeffmikels / timecode_tools
  Implements LTC and MTC versions of the SMPTE timecode spec.
  ☆36Updated 3 years ago
• hennedo / wifitally
  An ESP8266 / M5StickC based tally light for use with Blackmagic ATEM.
  ☆27Updated 3 years ago
• NoahCallaway / TallyArbiter-arduino-neopixel
  ☆12Updated 4 years ago
• kasperskaarhoj / SKAARHOJ-Open-Engineering
  All design files for SKAARHOJ open projects. They are available to you under Creative Commons CC-by-sa unless otherwise noted. See http:/…
  ☆250Updated 5 years ago
• deckerego / tally_obs
  Tally light control for OBS, for use with tally_circuitpy or tally_pi
  ☆19Updated 10 months ago
• kripton / DMXoverNOW
  Wireless DMX over Espressif's ESP-NOW protocol
  ☆11Updated 5 years ago
• signorettae / ESP32-ArtNet-to-DMX
  A simple ArtNet-to-DMX converter based on an ESP32 board
  ☆53Updated last year
• Hundemeier / sacn
  A simple ANSI E1.31 (aka sACN) module for python.
  ☆53Updated 6 months ago
• hobbyquaker / mqtt-dmx-sequencer
  Control DMX devices via Art-Net by MQTT. Includes a simple sequencer. 💡🎬
  ☆26Updated 7 years ago
• DynamoBen / WIFItally
  WIFI Tally Light
  ☆35Updated 2 years ago
• wifi-tally / wifi-tally
  An affordable and reliable Tally Light that works via WiFi based on NodeMCU / ESP8266. Supports multiple video mixers.
  ☆91Updated 2 years ago
• hideakitai / Sony9PinRemote
  RS422 Sony 9-Pin Protocol Remote Controller of VTRs for Arduino
  ☆18Updated last year