Alternatives and similar repositories for lutoc

Users that are interested in lutoc are comparing it to the libraries listed below

• dirkx / SMPTE-EBU-TimecodeGenerator-ESP32
  ESP32 based SMPTE/EBU timecode generator, with NTP slaving, for Leitch and similar studio/broadcast clocks.
  ☆54Updated 2 years ago
• ArtScienceLab / ARDUINO_LTC_DECODER
  SMPTE/LTC decoder for Teensy 3.2 microcontroller audio shield
  ☆24Updated 3 years ago
• vanvught / h3dmx512-zip
  Images for Allwinner H2+/H3 DMX512 / RDM / Art-Net / sACN / USBPro / Pixel / WS28xx / TCNet / SMPTE
  ☆89Updated 3 months ago
• lydasia / openltc
  An Open Source SMPTE Linear Timecode Generator Based on ATmega328P(Arduino UNO).
  ☆62Updated 3 years ago
• FrankBoesing / LinearTimecode-Decoder
  LTC decoder for Teensy Audio Library
  ☆32Updated 5 years ago
• schoolpost / BlueMagic32
  Arduino ESP32 Library for connecting to Blackmagic Cameras using Bluetooth Low Energy.
  ☆101Updated 10 months ago
• R0BATZEN / Cable-Tester
  ☆9Updated 5 months ago
• kripton / DMXoverNOW
  Wireless DMX over Espressif's ESP-NOW protocol
  ☆11Updated 5 years ago
• jeffmikels / timecode_tools
  Implements LTC and MTC versions of the SMPTE timecode spec.
  ☆32Updated 3 years ago
• lplassman / V4L2-to-NDI
  A video input (V4L2) to NDI converter that works with Raspberry Pi (32-bit and 64-bit), and Intel/AMD CPUs
  ☆89Updated 3 months ago
• OpenLightingProject / rp2040-dmxsun
  RP2040-based USB DMX dongle with integrated web server
  ☆110Updated 2 months ago
• Novgorod / LANC-USB-GUI
  Arduino LANC to USB with GUI
  ☆23Updated 9 months ago
• foxworth42 / arduino-VISCA-controller
  Arduino based VISCA controller for Cisco TelePresence Precision series of cameras
  ☆26Updated 4 years ago
• mitkunz / diy_timecode_generator
  SMPTE standard-compliant DIY LTC timecode generator, that supports framerates of 24, 25, or 30 fps (NDF).
  ☆19Updated last year
• rpitv / atem-tally
  Node.js ATEM tally interface built to run on a Raspberry Pi over XLR cables
  ☆23Updated last year
• xn--nding-jua / UltranetReceiver
  A FPGA-based receiver for Behringers Ultranet (X32, P16-I, P16-M, etc.)
  ☆92Updated 7 months ago
• ryanmccartney / dante-control
  Javascript Library for controlling Dante devices
  ☆52Updated 3 years ago
• wasn-eu / vTally
  vTally - Wireless Tally and VISCA converter for vMix
  ☆16Updated 3 years ago
• Julusian / arduino-lanc
  Arduino based LANC to serial
  ☆17Updated 8 years ago
• mungewell / pico-timecode
  A budget friendly LTC/TimeCode device built from a RaspberryPi Pico - using the PIO blocks and MicroPython
  ☆49Updated 6 months ago
• tuck1s / UltranetReceiver
  Simple I2S receiver writing contents to SD card
  ☆60Updated 9 years ago
• mrv96 / ESP8266_ArtNetNode_v2
  ESP8266 based WiFi ArtNet to DMX, RDM and LED Pixels
  ☆14Updated last month
• sfc-arch / esp32_aes67_sender
  Prototype of sending AES67-based audio packets over WiFi.
  ☆16Updated 6 years ago
• ArtGateOne / ArtGateOne-DMX
  Simple ArtNet do DMX node for ArduinoUno
  ☆48Updated last year
• zjstraus / AES67-WebMeter
  Server that receives an AES67 audio stream and presents a webpage with meters
  ☆10Updated 5 years ago
• matiaspl / intercom
  A githubbed version of DIY production intercom system based on Mumble voice chat server and headless client running on Raspberry Pis.
  ☆63Updated last year
• OpenLightingProject / ja-rule
  Ja Rule is the code behind OLE, an Open Source DMX/RDM framework for PIC32 microcontrollers
  ☆50Updated 4 years ago
• philhartung / aes67-sender
  Make a soundcard input available in an AES67 network
  ☆193Updated last month
• matiaspl / LinkPi-ENCx
  ☆65Updated 2 months ago
• deckerego / tally_obs
  Tally light control for OBS, for use with tally_circuitpy or tally_pi
  ☆19Updated 7 months ago