polyideas / Outdoor_Solar_RobotLinks
Outdoor Solar Robot capable of performing 2-axis solar tracking for large panels.
☆24Updated 11 years ago
Alternatives and similar repositories for Outdoor_Solar_Robot
Users that are interested in Outdoor_Solar_Robot are comparing it to the libraries listed below
Sorting:
- Solar charge controller with integrated 12 V Li-Ion BMS☆16Updated 6 years ago
- Open source Maximum Power Point Tracking (MPPT) and inverter hardware/software for photovoltaic projects.☆47Updated 5 years ago
- Battery Management System with Active Cell Balancing☆31Updated 6 years ago
- Arduino-compatible library for battery management system based on Texas Instruments bq769x0 analog frontend (bq76920, bq76930 and bq76940…☆51Updated 10 months ago
- This repository contains the design files for actBMS cell module.☆10Updated 6 years ago
- An IO-PCB (two motor-driver/H-bridge, CAN, RS232, ADS1115, relay, ethernet, ardusimple f9p compatible connector) with an ESP32 for 12V po…☆38Updated 6 years ago
- ANT BMS (antBMS) control panel on C# with UART capability. I hacked protocol and reverse-engineered it.☆22Updated 5 years ago
- Battery cell monitor and balancer☆36Updated 8 months ago
- CAN-based Formula SAE / FSAE race car dashboard with data logging☆12Updated 6 years ago
- An open hardware platform for experimenting with DC-to-AC conversion, power and energy metering and grid tie inverters.☆74Updated 2 years ago
- With these schematics and PCB's, it's possible to create a 230V AC 4KW inverter. The main processor is based on Arduino Nano, with help f…☆64Updated 3 years ago
- Solar Tracker projects☆12Updated last year
- Web interface for Huebner inverter☆36Updated last year
- Python 3 Software for the Battery Management System with Active Cell Balancing☆12Updated 6 years ago
- Generalized Electric Vehicle Control Unit☆117Updated 3 years ago
- Arduino script to log CAN bus information to SD card. Mainly focused on J1939.☆25Updated 5 years ago
- ☆14Updated 9 years ago
- Here is an universal 1S to 4S BMS charger/tester either for Li-ion or LifePo4 cells buit arround an Arduino Uno☆15Updated 5 years ago
- ☆63Updated 6 years ago
- LIN master node emulation with preemptive background operation☆34Updated last year
- ☆19Updated 3 years ago
- Isolated current, voltage and SOC monitor for battery banks up to 85V☆54Updated 2 years ago
- Arduino based Maximum Power Point Tracking (MPPT) solar charge controller☆80Updated 7 years ago
- See video:☆37Updated 3 years ago
- Arduino Library for CAN Bed☆28Updated 4 years ago
- Battery management system for up to 15 Li-ion cells using bq76940 or bq76930☆72Updated 3 years ago
- A lightweight library for the HLW8032 SOP8 high precision energy metering IC☆62Updated 4 years ago
- S06S 250W Torque Simulation Sine Wave Controller☆15Updated 8 years ago
- ☆40Updated 8 years ago
- A ESP32 based interface between CAN-bus and IoT environments.☆47Updated 2 years ago