Alternatives and similar repositories for WEEDINATOR:

Users that are interested in WEEDINATOR are comparing it to the libraries listed below

• husarion / self-balancing-telepresence-robot
  Embedded firmware and web user interface for self balancing telepresence robot
  ☆31Updated 7 years ago
• dganbold / raspicam_node
  ROS node for mipi camera module of Raspberry Pi
  ☆23Updated last year
• alex-makarov / robaka-ros
  ROS project for Robaka - mobile ROS testbed
  ☆75Updated 2 years ago
• JoeyByrnes / OpenLeg
  Hardware and Software for an Open Source Robotic Leg
  ☆79Updated last year
• rosmo-robot / Rosmo_ESC
  Dual brushless motor ESC in #M5Stack module format
  ☆28Updated 2 years ago
• jetsonhacks / RTIMULib
  RTIMULib is a C++ and Python library that makes it easy to use 9-dof and 10-dof IMUs with embedded Linux systems (especially the Raspberr…
  ☆30Updated 5 years ago
• rpanther / panther
  🐆 Panther is an Open Robotic AGV platform ROS based for Outdoor and Indoor enviroments.
  ☆105Updated 4 years ago
• ROSbots / rosbots_setup_tools
  Set up ROS, OpenCV and other ROSbots modules for your ROBbots robot
  ☆99Updated 5 years ago
• neomanic / odrive_ros
  ROS driver for the ODrive motor drive
  ☆74Updated 3 years ago
• BroboticsInc31 / LilBro
  Lil'Bro is a 3D printed, open source quadrupedal robot that allows researchers to duplicate,modify, and create new methods for the robot.…
  ☆18Updated 5 years ago
• raspilot / Hardware
  raspilot hardware
  ☆18Updated 9 years ago
• introlab / securbot
  Security robot prototype
  ☆25Updated 5 years ago
• kazkojima / pmlps
  Tiny local positioning system with OpenMV cam
  ☆18Updated 4 years ago
• mjbots / power_dist
  ☆12Updated 3 months ago
• roaldlemmens / morph
  MORPH : Modular Open Robotics Platform for Hackers
  ☆45Updated 6 years ago
• picatostas / cnc_interface
  ROS node to interface cnc machines using GRBL as GCODE interpreter
  ☆11Updated 5 years ago
• dorna-robotics / dorna
  Dorna Robotics API
  ☆40Updated 4 years ago
• jeskesen / i2c_imu
  ROS node for communicating with several models of commercially available IMUs over I2C in linux.
  ☆53Updated 3 years ago
• PCrnjak / S-Drive-Firmware
  S_Drive is small bldc driver based on L6234 Three phase motor driver.
  ☆43Updated last year
• Rhoeby / hexapod_ros
  Rhoeby hexapod ROS Node
  ☆9Updated 9 years ago
• linorobot / ros_dwm1000
  Indoor/Outdoor Positioning System based on Decawave's DWM1000 Ultra Wide Band transceivers.
  ☆75Updated 4 years ago
• grassjelly / onine
  ROS based service robot
  ☆41Updated 6 years ago
• scuttlerobot / SCUTTLE
  SCUTTLE™: Sensing, Connected, Utility Transport Taxi for Level Environments [An open-source Mobile Robot]
  ☆80Updated last year
• TKJElectronics / BalancingRobotArduino
  This is the Arduino version of the code for my balancing robot/segway
  ☆75Updated 11 years ago
• ROBOTIS-GIT / OpenCR-Hardware
  BOM, Circuit and PCB Gerber of OpenCR
  ☆117Updated 4 years ago
• kwagyeman / openmv
  OpenMV Camera Module
  ☆13Updated last week
• ENSTABretagneRobotics / razor_imu_9dof
  A ROS driver and firmware to connect to Sparkfun OpenLog Artemis, 9DoF Razor IMU M0, 9DOF Razor IMU and 9DOF Sensor Stick. These boards c…
  ☆93Updated 2 years ago
• mjbots / mjmech
  ☆72Updated 4 years ago
• ROBOTIS-GIT / OpenCM9.04
  Software for OpenCM 9.04 / OpenCM means Open-source Control Module.
  ☆35Updated 3 years ago
• alexhuang888 / roscar
  Rover car test platform with OpenCV, Raspberry Pi, PiCamera and ROS
  ☆15Updated 9 years ago