oscimp / gr-satre
SATRE modem Two Way Satellite Time and Frequency Transfer receiver implemented as a GNU Radio processing block
☆16Updated 5 months ago
Alternatives and similar repositories for gr-satre:
Users that are interested in gr-satre are comparing it to the libraries listed below
- Software Defined Radio implementation of a Two Way Satellite Time and Frequency Transfer signal☆26Updated last month
- Passive radar measurements using synchronized RTL-SDR DVB-T receivers☆39Updated last year
- Sentinel1 passive bistatic radar measurement using an Ettus Research B210 receiver and Raspberry Pi4☆16Updated 3 years ago
- A simple OFDM Radar implementation☆43Updated 3 years ago
- This repo contains the source code of the physical layer developed for the DARPA Spectrum Collaboration Challenge (SC2).☆11Updated 5 years ago
- This repo is a compilation of code and resources for multiple SDR Platforms as part of a phased array beamforming project.☆43Updated 11 months ago
- BCJR-based decoder for CCSDS turbo codes (according to CCSDS 131.0-B-3)☆17Updated last year
- a Galileo OSNMA simulator☆26Updated last year
- Implementation of the DVBS2 standard using Matlab☆14Updated 7 years ago
- 6DOF simulation of a CubeSat detumbling in LEO under 3-axis magnetic control using a B-dot controller and LPFs in closed-loop feedback.☆19Updated 2 years ago
- Implementation of the CCSDS (Consultative Committee for Space Data Systems) standard for Turbo Codes☆41Updated 6 years ago
- Matlab functions for wireless communications focussing mostly on LTE / 3GPP.☆47Updated 12 years ago
- Galileo E1B/C Signal Generator☆44Updated 6 months ago
- ☆14Updated 4 years ago
- PyBER is a graphic application dedicated to the display of the BER/FER simulation results.☆11Updated last year
- Turning cheap(ish) Pluto-SDR receivers into passive radar sensors☆17Updated 10 months ago
- GNU Radio package implementing MUSIC and root MUSIC angle of arrival algorithms with blocks necessary to provide phase synchronization of…☆55Updated 3 years ago
- A GNU Radio module of a digital beamformer prototype for GNSS receivers☆18Updated 8 years ago
- A Python package for software-defined radio☆49Updated last week
- ☆19Updated 5 years ago
- UHF active noise radar☆22Updated 3 years ago
- Tools for High Sample Rate Recording and Post-Processing in GNURadio☆23Updated 6 years ago
- Using Software Designed Radio to transmit LTE downlink signals at 2.4 GHz☆42Updated 5 years ago
- Utilities for designing, building, and using a $35 Tin Can Radar, from the original 2006 prototype☆11Updated last year
- File Transfer with ADALM Pluto SDR☆29Updated last month
- Performance-enhanced GNURadio blocks (2nd/4th Order Costas Loops, AGC, Filters)☆36Updated 3 years ago
- Tutorial for creating new OOT modules for GNU Radio that leverage pyCUDA.☆22Updated last year
- GNURadio OOT Module Providing Signal Cross-Correlation☆23Updated 2 years ago
- Python scripts to simulate and analyze phased array antennas☆27Updated 5 years ago
- DVB-S2 SDR Transceiver powerded by AFF3CT & StreamPU.☆28Updated last month