jmfriedt / passive_radarLinks
Passive radar measurements using synchronized RTL-SDR DVB-T receivers
☆40Updated last year
Alternatives and similar repositories for passive_radar
Users that are interested in passive_radar are comparing it to the libraries listed below
Sorting:
- ☆36Updated 11 months ago
- UHF active noise radar☆22Updated 3 years ago
- This repo is a compilation of code and resources for multiple SDR Platforms as part of a phased array beamforming project.☆57Updated last year
- A simple OFDM Radar implementation☆49Updated 3 years ago
- GNU Radio package implementing MUSIC and root MUSIC angle of arrival algorithms with blocks necessary to provide phase synchronization of…☆55Updated 3 years ago
- ☆15Updated 4 years ago
- Sentinel1 passive bistatic radar measurement using an Ettus Research B210 receiver and Raspberry Pi4☆16Updated 3 years ago
- File Transfer with ADALM Pluto SDR☆30Updated 5 months ago
- Access and cotrol of PlutoSDR hardware using python bindings to libiio☆33Updated 5 years ago
- ☆21Updated last year
- ADRV90xx Getting Started Info☆11Updated 5 years ago
- Project for Radar Signal Processing - Passive Radar Simulation from RTL-SDR FM Data☆51Updated 3 months ago
- Software Defined Radar with GNURadio Companion☆72Updated 6 years ago
- DIY digital beamformer using ADALM-PLUTO☆82Updated last month
- DVB-S2 SDR Transceiver powerded by AFF3CT & StreamPU.☆31Updated 4 months ago
- DVB-S2 Receiver Extensions for GNU Radio☆112Updated 11 months ago
- pluto-adsb-sim generates ADSB signal IQ data stream, which is then transmitted by the software-defined radio (SDR) platform ADALM-Pluto.☆24Updated 5 years ago
- SATRE modem Two Way Satellite Time and Frequency Transfer receiver implemented as a GNU Radio processing block☆16Updated 8 months ago
- Turning cheap(ish) Pluto-SDR receivers into passive radar sensors☆19Updated last year
- FPGA code and Python API for adding chirp functionality to USRP N210 with CBX daughter board, after the required hardware modification.☆32Updated last year
- Main transceiver application☆30Updated 4 years ago
- 10 GHz Phased Array beamforming labs☆140Updated 4 years ago
- Tutorial for creating new OOT modules for GNU Radio that leverage pyCUDA.☆22Updated last year
- Using Software Designed Radio to transmit LTE downlink signals at 2.4 GHz☆44Updated 6 years ago
- Hands on labs for the ADALM Pluto SDR☆67Updated 3 years ago
- ☆19Updated 5 years ago
- A Python package for software-defined radio☆58Updated 2 months ago
- GRCon20 Workshop: Decoding Interplanetary Spacecraft☆47Updated 3 years ago
- gnuradio flowgraphs and OOT modules for DOA analysis☆65Updated 4 years ago
- OpenCL/GPU-enabled common blocks for GNURadio☆84Updated 2 years ago