Alternatives and similar repositories for solar-sis:

Users that are interested in solar-sis are comparing it to the libraries listed below

• Tobi177 / venus-chargerybms
  Driver to embed the Chargery BMS to a Venus OS device
  ☆32Updated last year
• scottwday / InverterOfThings
  ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters
  ☆41Updated 3 years ago
• PurpleAlien / jk-bms_grafana
  Read data from a JK BMS and graph it in Grafana
  ☆50Updated 2 months ago
• njfaria / SolPipLog
  Logger for the PIP Inverter series ( USB / RS232 version )
  ☆94Updated last year
• loopyengineeringco / Daly2Sofar
  ESP32 bridge allowing Daly Smart BMS to be used with a Sofar inverter/charger (and others that use SMA CANBUS protocol).
  ☆32Updated last year
• daromer2 / InverterOfThings
  ESP8266 based WiFi interface for Voltronic Axpert MppSolar PIP inverters
  ☆29Updated 3 years ago
• softwarecrash / Daly2MQTT
  ESP8266 Connector to get Daly / XENES / HI-BMS / BullTron BMS Data into MQTT systems
  ☆162Updated this week
• dpoulson / EPSolar
  EPSolar Solar Charge Controller to MQTT
  ☆43Updated 3 years ago
• aaronsb / victronvenussupport
  Support files for managing and deploying my Victron Venus OS stuff
  ☆19Updated 4 years ago
• kolins-cz / Smart-BMS-Bluetooth-ESP32
  Program to read out and display data from xiaoxiang Smart BMS over Bluetooth Low Energy
  ☆104Updated 7 months ago
• botaneta / JKbms_Emu_Pylon
  Emulación del protocolo CANBUS de Pylontech, para comunicación con inversores fotovoltaicos, usando un ESP32
  ☆11Updated 9 months ago
• juamiso / ANT_BMS
  Python Script for raspberry reading BMS Ant parameters via Bluetooth
  ☆40Updated 4 years ago
• bres55 / Smart-BMS-arduino-Reader
  ☆62Updated 5 years ago
• syssi / esphome-soyosource-gtn-virtual-meter
  ESPHome component to simulate the current clamp to control the Soyosource GTN1200 limiter
  ☆82Updated 3 weeks ago
• ClassicDIY / PylonToMQTT
  Reads data from the Sage BMS console port and publishes to MQTT
  ☆26Updated last month
• tgalarneau / bms
  JBD BMS and Thornwave bluetooth data monitoring
  ☆44Updated 3 years ago
• ferelarg / Seplos3MQTT
  Python script to connect a battery pack using BMS Seplos v3.0 to MQTT
  ☆15Updated last year
• KinDR007 / VictronSmartShunt-ESPHOME
  SmartShunt ve.direct to ESPHOME node
  ☆71Updated last year
• Uksa007 / esphome-jk-bms-can
  ESPHome component to monitor a Jikong Battery Management System (JK-BMS) via RS485 or BLE, CAN bus Goodwe/Pylon
  ☆181Updated 6 months ago
• NEEY-electronic / JK
  ☆64Updated 2 years ago
• victronenergy / gui-v2
  ☆41Updated this week
• ned-kelly / docker-epever-homeassistant
  A Docker based Home Assistant interface via MQTT for the EPEver MPPT Charge Controllers
  ☆20Updated 4 years ago
• syssi / esphome-seplos-bms
  ESPHome component to monitor a Seplos Battery Management System (Seplos-BMS) via UART or RS485
  ☆85Updated last week
• irekzielinski / Pylontech-Battery-Monitoring
  Adding WiFi monitoring to US2000B and US2000C batteries.
  ☆144Updated 2 years ago
• kwindrem / RpiDisplaySetup
  Raspberry Pi 7" touchscreen for Venus OS (also HDMI)
  ☆44Updated this week
• Tom-evnut / VEcan
  Communicating with Victron energy products, also compatible with other inverters and solar equipement
  ☆19Updated 7 years ago
• syssi / esphome-jbd-bms
  ESPHome component to monitor and control a Xiaoxiang Battery Management System (JBD-BMS) via UART-TTL or BLE
  ☆143Updated last month
• kscholty / SmartShuntINA226
  ☆32Updated 9 months ago
• justinschoeman / dalybms
  Interface layer for Daly Smart BMS
  ☆19Updated 3 years ago
• jaminNZx / Tracer-RS485-Modbus-Blynk
  An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app.
  ☆66Updated 5 years ago