okrasolar / kalman-socLinks
Okra's lightweight embedded state of charge algorithm.
☆13Updated 5 years ago
Alternatives and similar repositories for kalman-soc
Users that are interested in kalman-soc are comparing it to the libraries listed below
Sorting:
- Battery management system for 4-series li-ion packs☆61Updated 4 years ago
- Fully integrated 12V-24V BMS using ISL94202☆35Updated 2 years ago
- Battery management system for up to 5 Li-ion cells based on TI bq76920☆43Updated 7 years ago
- Firmware for LibreSolar BMS boards based on bq769x0, bq769x2 or ISL94202☆197Updated last month
- Battery management system for up to 15 Li-ion cells using bq76940 or bq76930☆72Updated 3 years ago
- foxBMS 1, online documentation at https://iisb-foxbms.iisb.fraunhofer.de/foxbms/gen1/docs/html/latest/☆176Updated last year
- 20 pin SWD/JTAG J-Link to 10 pin (0.1" and 0.05") reconfigurable Cortex-M header with power supply and TagConnect compatibility, as well …☆85Updated 8 months ago
- Firmware to support gs_usb on most STM32 devices☆53Updated 3 months ago
- 16s / 100A Battery Management System☆178Updated last year
- Firmware for Libre Solar MPPT/PWM charge controllers☆165Updated 2 years ago
- This project is aimed to get the SoC by using current integration method which measure the current passing through current sensor while c…☆10Updated 6 years ago
- SiC dual 80kW (2x40kW), 600V, 3 phase traction inverter with FOC☆45Updated last year
- 3-5S Battery Management System based on TI bq76920 IC and MSP430 uC.☆21Updated 7 years ago
- Command-line tool to flashing devices by CAN-BUS☆90Updated 6 years ago
- Main firmware of the Huebner inverter project☆181Updated 2 weeks ago
- This is my MPPT project I am doing for a solar boat racing application called the DieBieMPPT☆16Updated 8 years ago
- Firmware for the DieBieMS☆57Updated 4 years ago
- STM32 CAN-bus bootloader☆79Updated 9 years ago
- Homepage for the Open Hardware in the Loop Community☆19Updated 5 months ago
- FOC Motor Control Firmware☆93Updated last year
- ☆21Updated 7 years ago
- MPPT solar charge controller with dual USB ports☆72Updated 3 years ago
- Code for the Linduino, An Arduino Uno-based board that is compatible with many Analog Devices evaluation boards☆123Updated last year
- This repository contains the Light and Versatile Graphics Library (LVGL) port for the STM32H7B3I-DK development board.☆17Updated last week
- Segger RTT console using ST-link☆62Updated last week
- SSD1306 display drivers for STM32 using SPI. Completely non-blocking with use of interrupts and DMA.☆37Updated 5 years ago
- Entree is a USB-C CAN interface with USB-PD - gets the CAN party started!☆83Updated last year
- STM32 CAN bus example☆43Updated 5 years ago
- gs_usb compatible firmware for candleLight, cantact and canable☆81Updated 4 years ago
- slCAN compatible firmware for STM32f103C8T6☆77Updated 3 years ago