nrobertus / Blackmagic-LANC
A project to control the Black Magic line of cameras through the LANC port, probably with an arduino or ESP 8266
☆19Updated 7 years ago
Alternatives and similar repositories for Blackmagic-LANC:
Users that are interested in Blackmagic-LANC are comparing it to the libraries listed below
- Arduino ESP32 Library for connecting to Blackmagic Cameras using Bluetooth Low Energy.☆100Updated 9 months ago
- An Open Source SMPTE Linear Timecode Generator Based on ATmega328P(Arduino UNO).☆60Updated 3 years ago
- Arduino camera remote control (LANC interface)☆22Updated 9 years ago
- Transport stream recorder for H.264 streaming devices by Blackmagic Design☆35Updated 9 years ago
- A library for connecting an Arduino with Ethernet shield to Blackmagic Designs ATEM video switcher range.☆18Updated 13 years ago
- ESP32 based SMPTE/EBU timecode generator, with NTP slaving, for Leitch and similar studio/broadcast clocks.☆52Updated 2 years ago
- Images for Allwinner H2+/H3 DMX512 / RDM / Art-Net / sACN / USBPro / Pixel / WS28xx / TCNet / SMPTE☆89Updated 2 months ago
- Arduino based LANC to serial☆17Updated 8 years ago
- hacked library and test sketch for controlling blackmagic micro cameras from an arduino over sbus☆44Updated 6 years ago
- SMPTE/LTC decoder for Teensy 3.2 microcontroller audio shield☆24Updated 3 years ago
- Wireless tally and camera control for Blackmagic cameras connected directly to an ATEM switcher over WiFi☆21Updated last week
- A budget friendly LTC/TimeCode device built from a RaspberryPi Pico - using the PIO blocks and MicroPython☆45Updated 4 months ago
- LTC decoder for Teensy Audio Library☆32Updated 5 years ago
- Implements LTC and MTC versions of the SMPTE timecode spec.☆32Updated 3 years ago
- Node.js ATEM tally interface built to run on a Raspberry Pi over XLR cables☆23Updated last year
- Arduino Library to communicate to Lanc enabled Cameras☆20Updated 8 months ago
- Wireshark dissector for Blackmagic Design ATEM video switcher protocol.☆50Updated 4 years ago
- An ESP8266 / M5StickC based tally light for use with Blackmagic ATEM.☆27Updated 3 years ago
- A project to create tally lights for vMix using Arduino☆40Updated 4 years ago
- A javascript library for communication with the Blackmagic Hyperdeck.☆26Updated last year
- A CasparCG tool for que and play of mediafiles☆35Updated 7 months ago
- Init☆19Updated 9 years ago
- Raspberry Pi based video playback deck server☆31Updated 5 years ago
- Tilta Nucleus N reverse engineering☆26Updated 4 years ago
- Wireless tally light system for ATEM switchers.☆32Updated 4 years ago
- Simulates an Atem switcher☆68Updated 5 years ago
- Library for Arduino with Ethernet Shield implements Art-Net and sACN with example DMX output using USART serial☆27Updated 3 years ago
- USB Joystick control of VISCA-compatible PTZ video cameras☆13Updated 5 months ago
- Python ATEM mixer control library☆20Updated 6 years ago
- WIFI Tally Light☆34Updated last year