mathijsk / Arduino-Library-for-ATEM-SwitchersLinks
A library for connecting an Arduino with Ethernet shield to Blackmagic Designs ATEM video switcher range.
☆19Updated 13 years ago
Alternatives and similar repositories for Arduino-Library-for-ATEM-Switchers
Users that are interested in Arduino-Library-for-ATEM-Switchers are comparing it to the libraries listed below
Sorting:
- Images for Allwinner H2+/H3 DMX512 / RDM / Art-Net / sACN / USBPro / Pixel / WS28xx / TCNet / SMPTE☆91Updated 11 months ago
- All design files for SKAARHOJ open projects. They are available to you under Creative Commons CC-by-sa unless otherwise noted. See http:/…☆251Updated 5 years ago
- Firmware for FADER_X motorized fader banks☆17Updated last year
- LTC decoder for Teensy Audio Library☆32Updated 5 years ago
- DMXUSB emulates an ENTTEC-compatible DMXKing USB to DMX serial device with one, two, or n universes.☆119Updated 6 years ago
- ESP8266 based WiFi ArtNet to DMX - Supports 2 full universes☆106Updated 8 years ago
- A full-featured DMX library for Teensy 3, Teensy LC, and Teensy 4. "Programmable DMX and arbitrary USB serial device emulation."☆104Updated 2 years ago
- Arduino library to control GrandMA3 lighting consoles using OSC☆36Updated last year
- An Arduino library for sending and receiving DMX RDM packets.☆104Updated 3 weeks ago
- ESP32 based SMPTE/EBU timecode generator, with NTP slaving, for Leitch and similar studio/broadcast clocks.☆58Updated 2 years ago
- SMPTE/LTC decoder for Teensy 3.2 microcontroller audio shield☆26Updated 4 years ago
- hacked library and test sketch for controlling blackmagic micro cameras from an arduino over sbus☆47Updated 7 years ago
- DMX Transmit and Receive for Teensy with RDM support.☆53Updated 7 years ago
- Arduino library for a Art-Net-Node (artnet) over WiFi, handle DMX data and response to Poll requests. Runs on ESP8266, ESP32, WiFi101 and…☆88Updated last year
- Send and receive sACN DMX packets following ANSI E1.31☆28Updated 4 months ago
- ESP8266 based WiFi ArtNet to DMX, RDM and LED Pixels☆44Updated 6 years ago
- Project to store DMX frames received over ArtNet into a SD card and play them back to a WS2812B LED strip using nodemcu☆41Updated 7 years ago
- RP2040-based USB DMX dongle with integrated web server☆122Updated 9 months ago
- Init☆19Updated 9 years ago
- ☆38Updated 5 years ago
- A Chataigne module to control grandMA3 via OSC☆27Updated 5 months ago
- A board for driving 32 strings of pixels from a Teensy 4.1. Similar to the OctoWS2811, but with 32 outputs.☆14Updated 3 years ago
- CRMX TimoTwo Library for MKR Wireless DMX Shield☆25Updated 5 years ago
- sACNView provides a tool for monitoring and sending the Streaming ACN lighting control protocol used in theatres, TV studios and architec…☆121Updated this week
- Library for sending and receiving sACN (E1.31) lighting data☆14Updated 4 years ago
- Simple ArtNet do DMX node for ArduinoUno☆53Updated 2 years ago
- Node.js ATEM tally interface built to run on a Raspberry Pi over XLR cables☆23Updated 2 years ago
- Python ATEM mixer control library☆20Updated 7 years ago
- RS422 Sony 9-Pin Protocol Remote Controller of VTRs for Arduino☆18Updated last year
- Code for the Megapixel Controller using E1.31☆15Updated 6 years ago