Alternatives and similar repositories for pico-usb-io-board

Users that are interested in pico-usb-io-board are comparing it to the libraries listed below

• 8086net / pico-sexa-uart-bridge
  Raspberry Pi Pico UART-USB-I2C bridge (USB to six UARTs and one I2C)
  ☆67Updated 9 months ago
• daniel-thompson / i2c-star
  A clone of the i2c-tiny-usb based upon STM32 and libopencm3
  ☆143Updated 2 years ago
• jaydcarlson / py32-template
  ☆93Updated last year
• eeucalyptus / ch32v003-usbpd
  Use the ch32v003 as a usb pd controller
  ☆48Updated last year
• lonehog / JTAGprobe
  Firmware for Raspberry Pico to work as JTAG debugger using OpenOCD
  ☆71Updated 9 months ago
• voltlog / emmc-wfbga153-microsd
  eMMC WFBGA153 to microSD card adapter PCB
  ☆70Updated last year
• Nicolai-Electronics / rp2040-i2c-interface
  ☆249Updated last year
• xyphro / I3CBlaster
  Raspberry pico / RP2040 based USB to I3C converter with Python support
  ☆76Updated 2 months ago
• zeldin / fx3lafw
  Blob-free logic analyzer firmware for FX3
  ☆85Updated 2 years ago
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆57Updated 2 weeks ago
• essele / pico_debug
  A fast flasher/debugger for RP2040 based devices (runs on Raspberry Pi Pico)
  ☆84Updated last year
• holysnippet / pico_eth_doc
  RP2040 Minimal hardware (PIO) Ethernet interface + LwIP TCP/IP stack driver
  ☆119Updated 3 years ago
• gamblor21 / rp2040-logic-analyzer
  Using a RP2040 Pico as a basic logic analyzer, exporting CSV data to read in sigrok / Pulseview
  ☆93Updated 4 years ago
• elehobica / pico_spdif_rx
  S/PDIF receiver library for Raspberry Pi Pico series
  ☆99Updated 7 months ago
• Tengo10 / pinout-overview
  A simple Python tool to create pinout overviews of ICs.
  ☆35Updated last year
• xobs / blackmagic-espidf
  Deprecated project -- please use Farpatch
  ☆37Updated 5 months ago
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆55Updated 3 years ago
• perexg / picoprobe-sump
  ☆41Updated 4 years ago
• jjsch-dev / pico_i2c_sniffer
  i2c sniffer with a Raspberry Pi Pico
  ☆93Updated 4 years ago
• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆11Updated 3 years ago
• rhulme / pico-flashloader
  Small (<4k) flashloader for the RP2040 to allow a power-fail safe update in situations where the built-in bootloader is not suitable.
  ☆86Updated 11 months ago
• mithro / kicad-mini-pci-express
  KiCad library and templates for creating designs with Mini-PCI-express cards (both the cards and sockets).
  ☆107Updated 7 years ago
• azonenberg / voltage-divider-calculator
  Tool for selecting voltage divider components given constraints and a list of available resistors
  ☆35Updated 2 years ago
• timonsku / M.2-Card-Footprints
  Footprints and template for making your own M.2 devices
  ☆121Updated 4 months ago
• zoobab / versaloon
  JTAG Versaloon firmware for the STM32 Bluepill board
  ☆142Updated 3 years ago
• knarfS / smuview
  SmuView is a GUI for sigrok that supports power supplies, electronic loads and all sorts of measurement devices like multimeters, LCR met…
  ☆148Updated 5 months ago
• Jana-Marie / analog-toolkit
  A smol and simple STM32G431 based Analog to USB toolkit.
  ☆68Updated last year
• basilhussain / ch32v003-bootloader-docs
  A 'missing manual' for the WCH CH32V003 microcontroller factory bootloader
  ☆65Updated 6 months ago
• FRautenberg / Logic-Analyzer
  simple and cheap 16 channel logic analyzer based on Cypress CY7C68013A development board
  ☆39Updated 5 years ago
• koendv / SerialWireOutput
  Serial Wire Output (SWO) library for STM32duino arm Arduinos
  ☆20Updated 2 years ago