necroware / nw12887
Drop-In replacement for Dallas DS12887 RTC module
☆46Updated 3 years ago
Alternatives and similar repositories for nw12887:
Users that are interested in nw12887 are comparing it to the libraries listed below
- Monotech XT-IDE Deluxe - Bootable ISA CF+IDE Interface☆29Updated last year
- A voltage adapter PCB for 486 CPUs☆40Updated last year
- A wavetable module powered by a Raspberry Pi Zero 2W and mt32-pi☆49Updated last month
- MDA/CGA/EGA to VGA FPGA Converter V2.00☆64Updated 6 years ago
- Socket 7 Voltage Regulator Module☆52Updated 3 months ago
- PCB design for the pal dumper created by Charles MacDonald☆20Updated 7 years ago
- This is a modified version of the Graphics Gremlin ISA CGA/MDA graphics card to include a HDMI port.☆50Updated 3 months ago
- Device firmware for accessing a floppy drive at the raw flux level☆61Updated 4 months ago
- Enhanced 4164 DRAM tester using March C- algorithm and access time☆23Updated 2 years ago
- Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.☆52Updated 8 months ago
- ISA floppy disk controller card that supports up to 8 floppy drives☆70Updated last year
- ISA 4Mb EMS expansion board☆33Updated 5 months ago
- 8088-compatible 8-bit ISA PC/104 SVGA Card☆26Updated 5 years ago
- This repository contains the KiCad files and the gerber files for the DuPAL boards.☆49Updated 2 months ago
- Real Time Clock for your PC XT. Very low profile, simple and open hardware.☆32Updated 5 months ago
- ☆18Updated 2 years ago
- A Turbo circuit with a MHz display that can slow down the CPU speed☆34Updated last month
- Similar to the "Not-A-Varta", but with a vertical CR2032 holder, and elongated mounting holes.☆37Updated 2 years ago
- Simple 8-bit ISA RAM expansion board☆32Updated last year
- ☆79Updated 4 years ago
- CMS Logic Scheme for Sound Blaster 2.0☆40Updated last year
- Bootloader & Firmware Updater☆18Updated 5 months ago
- This Device allows to connect a PS/2 Mouse to your Serialport☆38Updated 4 years ago
- Attempt to reverse-engineer a Proton PT8010AF based Turbo XT motherboard☆20Updated 3 years ago
- Sound Card for the ISA (8bit) bus sporting Sound Blaster / Sound Blaster PRO emulation via ES688F chip, and a real Yamaha OPL3 FM Synth. …☆38Updated last year
- Adapt a floppy cable meant to use an edge connector to use a 34-pin female pin connector instead.☆16Updated 3 months ago
- ☆37Updated 7 years ago
- PCBs to plug various newer SMT parts into vintage DIP sockets. Generaly to use a newer PLCC, SOIC, or TSOP EEPROM or Flash part to replac…☆26Updated 2 months ago
- MFM emulator code☆56Updated 2 weeks ago
- CPLD Replacement for A2000 Buster☆68Updated last year