scrapcomputing / 486SocketBlaster
A voltage adapter PCB for 486 CPUs
☆41Updated last year
Alternatives and similar repositories for 486SocketBlaster:
Users that are interested in 486SocketBlaster are comparing it to the libraries listed below
- The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics☆47Updated 9 months ago
- A new ATX design of an XT compatible PC mainboard☆55Updated 5 months ago
- CMS Logic Scheme for Sound Blaster 2.0☆40Updated last year
- A wavetable module powered by a Raspberry Pi Zero 2W and mt32-pi☆51Updated last month
- ISA 4Mb EMS expansion board☆33Updated 5 months ago
- CL-GD5434-based ISA VGA card.☆29Updated 4 years ago
- Sound Card for the ISA (8bit) bus sporting Sound Blaster / Sound Blaster PRO emulation via ES688F chip, and a real Yamaha OPL3 FM Synth. …☆39Updated last year
- This repository contains the KiCad files and the gerber files for the DuPAL boards.☆49Updated 2 months ago
- Open source retro ISA video card☆21Updated 2 years ago
- ☆15Updated last year
- This Device allows to connect a PS/2 Mouse to your Serialport☆39Updated 4 years ago
- PCChips M396F V2.7 Replika☆79Updated 9 months ago
- Real Time Clock for your PC XT. Very low profile, simple and open hardware.☆32Updated 6 months ago
- RGBS converter for MDA, Hercules, CGA and EGA☆116Updated 2 months ago
- GIT Repo for the ATX2AT Smart Converter☆66Updated 3 years ago
- ISA 8bit sound card based on the ES1868F sound chip, providing Sound Blaster PRO and OPL3 compatibility in a highly integrated package☆72Updated last year
- A Turbo circuit with a MHz display that can slow down the CPU speed☆34Updated 2 months ago
- Case for Micro 8088☆47Updated 3 months ago
- Similar to the "Not-A-Varta", but with a vertical CR2032 holder, and elongated mounting holes.☆37Updated 2 years ago
- This board converts CGA/EGA/MDA/Hercules TTL signals into analog RGB signals that can be fed into a compatible monitor☆16Updated 5 months ago
- An Apple II Language Card. Based on a design by iz8dwf☆34Updated last year
- A low-profile SCSI adapter from male 50-pin to male DB-25☆25Updated 3 years ago
- This board is and EGA clone based on a reversed PA-WTEGA card, based on the chipset by CHIPS (P82C435 + P82A436).☆23Updated last year
- SARC 2016 Chipset Based 386SX/486SLC Motherboard☆21Updated last year
- Driver for 3COM 3C509B cards in 8-bit IBM PC/XT slots☆67Updated 3 years ago
- Multi-Floppy BIOS Extension☆49Updated 2 months ago
- ISA floppy disk controller card that supports up to 8 floppy drives☆70Updated last year
- Socket 7 Voltage Regulator Module☆52Updated 4 months ago
- The CGA Compatibility Tester: Tests ISA videocards for register-level compatibility with CGA☆53Updated last year
- PCMCIA OPL3 Sound Card☆27Updated 3 months ago