Alternatives and similar repositories for Not-A-Varta-CR2032

Users that are interested in Not-A-Varta-CR2032 are comparing it to the libraries listed below

• wiretap-retro / Not-A-Varta
  A standard 19mm length Varta replacement with a CR1220 and charge protection.
  ☆44Updated 2 years ago
• scrapcomputing / WavetablePi
  A wavetable module powered by a Raspberry Pi Zero 2W and mt32-pi
  ☆55Updated 3 months ago
• necroware / nw12887
  Drop-In replacement for Dallas DS12887 RTC module
  ☆47Updated 3 years ago
• necroware / sbcms
  CMS Logic Scheme for Sound Blaster 2.0
  ☆40Updated last year
• scrapcomputing / 486SocketBlaster
  A voltage adapter PCB for 486 CPUs
  ☆42Updated 2 years ago
• scrapcomputing / ThrottleBlaster
  A Turbo circuit with a MHz display that can slow down the CPU speed
  ☆41Updated 3 weeks ago
• pascalorama / paldumper
  PCB design for the pal dumper created by Charles MacDonald
  ☆20Updated 8 years ago
• spark2k06 / graphics-gremlin
  Open source retro ISA video card
  ☆21Updated 2 years ago
• TheRetroWeb / PicoPOST
  RPi Pico based POST (Power-On Self Test) Diagnostic Card
  ☆45Updated 3 months ago
• raymondh2 / CompaqPortableIII
  ☆15Updated last year
• DuPAL-PAL-DUmper / DuPAL_Board
  This repository contains the KiCad files and the gerber files for the DuPAL boards.
  ☆49Updated 4 months ago
• jamarju / c64-sram
  SRAM substitute for C64C shortboards
  ☆58Updated 7 years ago
• skiselev / isa-opl2
  ISA OPL2 Card
  ☆27Updated last year
• gotaproblem / ST_HD_Emulator
  ☆18Updated 2 years ago
• hkzlab / ISA_EGA_CHIPS
  This board is and EGA clone based on a reversed PA-WTEGA card, based on the chipset by CHIPS (P82C435 + P82A436).
  ☆23Updated last year
• scrapcomputing / MHzDisplayBlaster
  A replica of the TD-37S 7-segment display used in PCs from the 90s
  ☆28Updated 2 months ago
• borb / amigahid-pico
  Use USB input devices on Amiga computers, using the excellent Raspberry Pi Pico as a USB-to-bitbang adapter.
  ☆53Updated 10 months ago
• wiretap-retro / ATX--5V-Inline-Adapter
  A small inline adapter for an ATX power supply to generate -5VDC for Retro PCs
  ☆15Updated 2 years ago
• dkgrizzly / GreenSCSI
  A small SCSI device based on Teensy 3.5
  ☆12Updated 8 months ago
• kerokero5150 / SP2SD_DIY_KIT
  ☆32Updated 7 months ago
• Leshak-pcb / Pine-CL-GD5434
  CL-GD5434-based ISA VGA card.
  ☆29Updated 4 years ago
• terriblefire / tf1230
  Terriblefire TF1230
  ☆28Updated 3 years ago
• spark2k06 / Micro-XTCF
  ☆18Updated 2 years ago
• erichelgeson / BlueSCSI-Updater
  Bootloader & Firmware Updater
  ☆18Updated 8 months ago
• monotech / DeluxeFloppy
  Monotech DeluxeFloppy. ISA HD FLoppy + Serial + Boot ROM Card
  ☆18Updated 5 years ago
• barbeque / floppy-edge-connector-adapter
  Adapt a floppy cable meant to use an edge connector to use a 34-pin female pin connector instead.
  ☆16Updated 5 months ago
• hkzlab / ES688_ISA8
  Sound Card for the ISA (8bit) bus sporting Sound Blaster / Sound Blaster PRO emulation via ES688F chip, and a real Yamaha OPL3 FM Synth. …
  ☆39Updated last year
• hkzlab / CGA_Redux
  The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
  ☆50Updated 10 months ago
• pmandes / atari-130xe-replica
  Atari 130XE (64x4) Assy No. CA200519 motherboard replica
  ☆16Updated last month
• Tishima / myDRAMTester
  DRAMTester for DRAM 4164 41256
  ☆21Updated 2 years ago