Alternatives and similar repositories for cantools

Users that are interested in cantools are comparing it to the libraries listed below

• sebi2k1 / openCanSuite
  ☆31Updated 8 years ago
• karlyamashita / common_libraries
  These are reusable libraries. You'll need to include the LSP.h file and remove comment for what you need.
  ☆30Updated 2 weeks ago
• qnx425 / ELM327SLCAN
  ELM327 based vehicle's CAN bus sniffer
  ☆64Updated 6 years ago
• openvehicles / CAN-RE-Tool
  A reverse engineering tool for systems based on CAN bus communications
  ☆82Updated 4 years ago
• collin80 / A0RET
  CANBus reverse engineering firmware for the Macchina A0
  ☆18Updated 8 months ago
• autosportlabs / OBD2CAN
  Provides a bridge between any OBD2 compliant vehicle and the CAN bus interface.
  ☆43Updated 5 years ago
• saleae / can-analyzer
  Saleae Controller Area Network (CAN) Analyzer
  ☆24Updated 2 months ago
• PhilippFux / ESP32_CAN_Interface
  CAN_Interface for ESP32 (Cannelloni Protocol)
  ☆56Updated 4 years ago
• krumboeck / usb2can
  SocketCAN driver for UAB "8 devices" USB2CAN interface
  ☆53Updated 3 years ago
• linklayer / reversegear
  Offline Reverse Engineering Tools for Automotive Networks
  ☆51Updated last year
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆103Updated 6 years ago
• v-ivanyshyn / Arduino-OBD2-Async
  Arduino OBD library with asynchronous data requesting.
  ☆18Updated 7 years ago
• kdschlosser / vector_dbc
  Vector CANdb++ file parser
  ☆23Updated 2 years ago
• olegel / CANLogger
  CAN bus logger and analyser tool
  ☆63Updated 6 years ago
• AppSaloon / ecu-can-bus-simulator
  This is a small example sketch that simulates a cars ecu
  ☆79Updated 4 years ago
• festlv / canbus_logger
  CANBus logger using Arduino + MCP2515 with GUI in Python
  ☆24Updated 12 years ago
• DanielMartensson / GoobySoft
  General software for logging and controlling devices. Controlling Modbus, CAN bus via STM32PLC etc
  ☆38Updated 3 months ago
• togglebit / CANFDuino
  ☆29Updated 10 months ago
• collin80 / Open-Vehicle-Monitoring-System
  We are a group of enthusiasts who want an interface to be able to talk to our cars remotely, perhaps add on-car displays (such as heads-u…
  ☆11Updated 12 years ago
• fabiobaltieri / open-usb-can
  Open Source USB to CANBUS interface
  ☆109Updated last year
• dchad / OBD-Monitor
  Tools for interfacing with vehicle engine control units using the OBD-II protocol.
  ☆72Updated 4 years ago
• beyerch / DHP_Kepler
  Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)
  ☆38Updated 7 years ago
• kkuchera / canalyze-hw
  Hardware for a CAN to USB bridge.
  ☆58Updated 7 years ago
• ihaque / arduino-ecu-logger
  Arduino-based OBD2 engine monitor and data logger
  ☆36Updated 9 years ago
• caran / can4python
  ☆39Updated 2 years ago
• collin80 / due_canopen
  CANOpen library for due_can
  ☆11Updated 10 years ago
• garymeg / CanBus_Hacking
  Hacking a Vehicles CanBus
  ☆24Updated 3 years ago
• normaldotcom / canblaster
  Utility to forward SocketCAN canbus traffic over UDP to Cangaroo and other applications
  ☆22Updated 2 years ago
• andrewkabai / universal_can_filter
  ☆25Updated 5 years ago
• vChavezB / SimpleJ1939
  A simple j1939 communication library for Arduino
  ☆15Updated 3 years ago