Alternatives and similar repositories for lesonar2

Users that are interested in lesonar2 are comparing it to the libraries listed below

• kingoflolz / mic_gateware
  ☆17Updated 2 years ago
• pmarques-dev / PicoEncoder
  High resolution quadrature encoder using the PIO on the RP2040
  ☆55Updated last month
• vapetrov / PCB_strain_gauge
  ☆96Updated last year
• maximeborges / pico-rmii-ethernet
  ☆66Updated 2 years ago
• ricardodeazambuja / RPI0_GPU_FFT
  Experiments using the RPI Zero GPU for FFT (1D and 2D)
  ☆34Updated 3 years ago
• Diodes-Delight / Piunora-Hardware
  Design files and schematic for Piunora
  ☆51Updated last year
• knifter / DualPID
  Multi Channel Configurable PID regulator on M5Stack Core
  ☆46Updated 9 months ago
• piecol / CM5_MINIMA_REV2
  Compact, feature-filled CM5 carrier board
  ☆72Updated 2 months ago
• Jana-Marie / OtterCam-s3
  Open source 1080p60Hz USB & IP camera based on Sochip s3 and OS05A10/OS05A20 (general MIPI CSI IP camera interface).
  ☆51Updated 2 years ago
• tvlad1234 / Pico-10BASE-T-Library
  Library which allows the Pi Pico to send UDP packets over 10BASE-T Ethernet
  ☆9Updated 2 years ago
• SYZYGYfpga / pcb-templates
  Template PCB's for SYZYGY board designs
  ☆21Updated 2 years ago
• will127534 / PCIe3_Hub
  A opensource PCIe 3.0 Hub design based on ASM2806 with Raspberry Pi 5's PCIe FPC connector design
  ☆60Updated 6 months ago
• xyphro / I3CBlaster
  Raspberry pico / RP2040 based USB to I3C converter with Python support
  ☆63Updated 4 months ago
• gregdavill / DiVA-firmware
  Firmware and Gateware for the DiVA platform.
  ☆14Updated 3 years ago
• Quetzal-1-CubeSat-Team / quetzal1-hardware
  Hardware design files for the Quetzal-1 mission.
  ☆46Updated 5 months ago
• sitronlabs / Solder-Ninja-Pen-Hardware
  Enclosure and Circuit Board for the Solder Ninja Pen
  ☆34Updated last year
• machdyne / bonbon
  Bonbon Computer
  ☆15Updated 2 years ago
• Scottapotamas / embedded-wireless-latency-eval
  Testing a range of radio modules and protocols for latency.
  ☆36Updated last year
• MitkoDyakov / Calipatron
  I design my own digital caliper based on STM32F103C8T6 blue pill.
  ☆31Updated 7 months ago
• Breadstick-Innovations / Raspberry-Breadstick
  A Breadstick development board based around the Raspberry Pi Foundation's RP2040 microcontroller.
  ☆13Updated last year
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆34Updated 4 years ago
• decrazyo / fdxb
  Arduino FDX-B reader built from discrete components.
  ☆101Updated 5 months ago
• NNNILabs / Manhattan-Adapters-Prototyping-Ideas
  SMD adapters for Manhattan-style prototyping.
  ☆40Updated last year
• rtestardi / StickOS2
  StickOS® BASIC -- an entirely MCU-resident patented interactive programming environment, used by Flea-Scope™
  ☆34Updated last month
• cnlohr / oledscope
  Playing around with a 128x128 OLED module
  ☆29Updated 7 months ago
• sikra-io / open-lithium-bms
  Gerbers, BOM, and Schematics for Open UpCell [1S]
  ☆24Updated 2 years ago
• fasaxc / pico-bldc
  RP2040-based BLDC motor controller
  ☆40Updated last year
• signaloid / C0-microSD-Hardware
  Verilog design examples for use with the Signaloid C0-microSD
  ☆45Updated 3 months ago
• sphawes / fiber-laser-pcb-fab
  Instructions and settings for fabricating PCBs on a fiber laser, namely the xTool F1 Ultra
  ☆95Updated 5 months ago
• bairdd / Zyrus-Etcher
  Zyrus STM Tip Etching Machine
  ☆23Updated last year