mitxela / kiloboot
1kB TFTP Ethernet bootloader for ATmega328P and ENC28J60
☆52Updated 7 years ago
Related projects ⓘ
Alternatives and complementary repositories for kiloboot
- Simple demo firmware for the RISC-V GD32VF103☆29Updated 4 years ago
- Project to talk to IDE interface using Raspberry-Pi GPIO pins in SMI (Secondary Memory Interface bus) mode☆54Updated 7 years ago
- Blob-free logic analyzer firmware for FX3☆75Updated last year
- Tool for selecting voltage divider components given constraints and a list of available resistors☆31Updated last year
- ☆46Updated last year
- An open source cross-platform UF2 bootloader based on the TinyUSB library☆27Updated 4 years ago
- SCPI commands tools☆37Updated 6 years ago
- uboot for Rigol DS1xxxZ Oscilloscope☆30Updated 7 years ago
- Utility for reading EnergyTrace data from TI debug hardware☆37Updated 3 years ago
- Esden style kicad libraries.☆58Updated last week
- Audio out with an FTDI UART cable☆43Updated 3 years ago
- WART Audio: Use UARTs to play audio☆37Updated 3 years ago
- Discussion, files, spec, and more for a M.2 standard for makers☆32Updated 3 years ago
- A Linux command-line alternative to the FTDI FTProg utility for FTDI's FT-X series☆122Updated 4 months ago
- Various interface addon boards and expansions for the Glasgow Digital Interface Explorer☆16Updated last year
- Python module for an easier access to analyze ARM Cortex-M peripherals☆22Updated 4 months ago
- A simple Python tool to create pinout overviews of ICs.☆29Updated 9 months ago
- ☆76Updated 4 months ago
- Baseboard for the CJMCU FT232H module☆98Updated 4 months ago
- ☆28Updated 9 years ago
- A GPIB shield for the raspberry pi☆33Updated 2 years ago
- iCE40HX8K development board with SRAM and bus for fast ADC, DAC, IOs☆34Updated 2 weeks ago
- DAPLink (CMSIS-DAP) compatible hardware☆17Updated 2 years ago
- A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.☆41Updated 3 years ago
- A firmware-only half-duplex 10Base-T implementation for AVRs☆125Updated last month
- Reverse engineering the EEVBlog 121GW☆54Updated 6 years ago
- Small breadboard friendly STM32 (eventually other mcu's too) eval boards with exposed JTAG and SWD for the use with Black Magic Probe!☆19Updated 8 years ago
- ☆32Updated 10 months ago
- Anotter USB temperature logger that can record up to four channels with thermocouple or NTCs connected via CDC directly or SCPI to USB.☆59Updated last year