mcci-catena / Catena-SketchesLinks
Top-level Arduino sketches for the MCCI Catena family of IoT LPWA Devices
☆12Updated 9 months ago
Alternatives and similar repositories for Catena-Sketches
Users that are interested in Catena-Sketches are comparing it to the libraries listed below
Sorting:
- Installer for TheThingsNetwork on MultiTech Conduit☆20Updated 3 years ago
- Arduino platform library for MCCI Catena IoT Systems☆13Updated 2 months ago
- Arduino C++ code to communicate with a Microchip RN2483 module☆86Updated 3 weeks ago
- RAK811_BreakBoard for platformio from https://github.com/RAKWireless/RAK811_BreakBoard☆23Updated 5 years ago
- Collection of sketches using the Arduino core for Murata's CMWX1ZZABZ (STM32L082 and SX1276)☆101Updated 2 years ago
- Port of LMIC-1.5 library tp Atmega 328 and ESP6822, including alternative AES encription library☆82Updated 9 years ago
- ☆81Updated 5 years ago
- Raspberry PI iC880A and LinkLab Lora Gateway Shield☆74Updated 5 years ago
- ☆37Updated 2 years ago
- The Things Network Node workshop examples☆20Updated 2 years ago
- Arduino Core for STM32L0☆125Updated 2 years ago
- Multi protocol packet forwarder supporting the TTN gateway-connector protocol.☆89Updated 2 years ago
- Backplane to connect an iC880A-SPI concentrator board to a Raspberry Pi, with protection against reversed power supply and voltage spikes…☆16Updated 6 years ago
- Single Channel LoRaWAN Gateway☆68Updated 7 years ago
- Make one or more Things as a PoC for LoRa☆44Updated 9 years ago
- LoraWAN-in-C library, adapted to run under the Arduino environment☆41Updated 8 years ago
- Arduino Library for TTN Devices☆209Updated 2 years ago
- Raspberry Pi port LoRaMAC in C / LoRaWAN in C http://www.research.ibm.com/labs/zurich/ics/lrsc/lmic.html☆56Updated 9 years ago
- Sketches for the NEXUS board for RFM95W (RFM92W, RFM98W)☆37Updated 9 years ago
- IBM LMIC v1.5 (LoRaWAN in C) adapted to run under the Arduino environment☆43Updated 9 years ago
- Hardware Abstraction Layer (HAL) for IBM's LMIC 1.6 communication stack targeted to RPi and Dragino LoRA/GPS HAT.☆47Updated 6 years ago
- SX1301 Lora Concentrator Raspberry PI based gateway setup☆79Updated 4 years ago
- Software for an RFM95W based TTN node☆38Updated 7 years ago
- LoRa Basics™ Station - The LoRaWAN Gateway Software☆58Updated 11 months ago
- Adafruit Tiny LoRa☆45Updated last month
- Arduino project for a transmitter and receiver using the RadioHead library with RFM95W modules☆26Updated 9 years ago
- Example for Dragino LoRa Devices.☆88Updated 6 years ago
- Space for gathering sample codes and a knowledge wiki at one place☆10Updated 8 years ago
- Firmware and tools used to connect Kerlink Wirnet gateways to The Things Network Stack for LoRaWAN☆20Updated 4 years ago
- Example code for end devices with GPSes on board, transmitting their coordinates in the payload of the LoRaWAN packet in a format that is…☆22Updated 4 years ago