Alternatives and similar repositories for rak811Demos:

Users that are interested in rak811Demos are comparing it to the libraries listed below

• RAKWireless / RAK811_BreakBoard
  RAKwireless,RAK811,BreakBoard,GPS tracker,Low power,Open source
  ☆5Updated 3 years ago
• jcaridadhdez / RAK811-tracker
  Example code for RAK811 nodes with GPS on board, transmitting their coordinates in the payload of the LoRaWAN packet in a format that is …
  ☆14Updated 3 years ago
• Ebiroll / RAK811_BreakBoard
  RAK811_BreakBoard for platformio from https://github.com/RAKWireless/RAK811_BreakBoard
  ☆23Updated 5 years ago
• xoseperez / s7xg
  AcSIP S7XG LoRaWAN/GPS module library
  ☆26Updated 5 years ago
• lupyuen / LoRaArduino
  Arduino code for connecting to LoRa IoT gateway at Temasek Polytechnic
  ☆27Updated 4 years ago
• azerimaker / Penguino-SAMR34
  This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.
  ☆61Updated 4 years ago
• sparkfun / ESP32_LoRa_1Ch_Gateway
  ESP32+RFM95 = Single-channel LoRa WiFI Gateway (or device!)
  ☆30Updated 2 years ago
• will127534 / lora_gateway
  Driver/HAL to build a gateway using a concentrator board based on Semtech SX1301 multi-channel modem and SX1257/SX1255 RF transceivers.
  ☆24Updated 7 years ago
• azerimaker / Penguino-STM32WL-LoRa-E5
  This repo contains all the necessary design and fabrication files for the Seeed Studio LoRa-E5 based Penguino Feather breakout board.
  ☆38Updated 3 years ago
• RAKWireless / RAK811_LoRaNode
  ☆13Updated 6 years ago
• hallard / RAK3172-Breakout
  STM32WL LoRaWAN Breakout board for RAK3172
  ☆31Updated last year
• arduino / mkrwan1300-fw
  ☆23Updated 3 years ago
• danak6jq / RAK3172
  Port of STM32WLxx example for RAK3172
  ☆32Updated last year
• dragino / LGT-92_-LoRa_GPS_Tracker
  Software Source code for LoRa_GPS_Tracker
  ☆50Updated 3 years ago
• s54mtb / lora_breakout
  Breakout board for LoRa all-in-one module CMWX1ZZABZ
  ☆13Updated 5 years ago
• johncobb / catm1_bg96
  Configuring the Quectel BG96 for connectivity to Amazon's IoT
  ☆15Updated 5 years ago
• Ideetron / Nexus_LoRaWAN
  Arduino Sketch to make your Nexus board function as a LoRaWAN mote
  ☆10Updated 7 years ago
• DavidAntliff / esp32-freqcount-example
  ESP32-compatible example for esp32-freqcount component.
  ☆22Updated 4 years ago
• BigCorvus / SMA-Q2-Firmware-3
  3rd take on the ultimate open source smartwatch project
  ☆13Updated 5 years ago
• Ideetron / RFM95W_Nexus
  Sketches for the NEXUS board for RFM95W (RFM92W, RFM98W)
  ☆37Updated 8 years ago
• Wiz-IO / Arduino-Quectel-BC66
  Arduino port for Quectel BC66 LTE Narow Band modules ( OpenCPU based )
  ☆50Updated 5 years ago
• TheThingsIndustries / generic-node-docs
  Documentation for Generic Node
  ☆9Updated last year
• xoseperez / rak833-hat
  Raspberry Pi Hat for the RAK833 MiniPCI-E module
  ☆16Updated 6 years ago
• krzychb / esp32-lna
  Example code and description how to use ESP32 low noise amplifier (LNA), including Arduino library and ESP-IDF component
  ☆53Updated 5 years ago
• cjhdev / lora_device_lib
  A LoRaWAN Device Library
  ☆33Updated last year
• s54mtb / LoRaDunchy
  Lora board with Arduino nano compatibile pinout and simple battery management
  ☆35Updated 6 years ago
• tanupoo / lorawan_toa
  LoRa Time on Air Calculator
  ☆25Updated 4 years ago
• GrumpyOldPizza / ArduinoCore-stm32l0
  Arduino Core for STM32L0
  ☆126Updated 2 years ago
• aureleq / SigfoxLoRa_Murata
  Application example to send both Sigfox and LoraWAN messages using Murata module
  ☆11Updated 2 years ago
• MicrochipTech / atsamr34_lorawan_rn_parser
  "IoT Made Easy!" - Control SAM R34 or WLR089U0 Module with ASCII command set over UART
  ☆18Updated 3 years ago