cmatteri / CC1101-Weather-ReceiverLinks
☆13Updated 6 years ago
Alternatives and similar repositories for CC1101-Weather-Receiver
Users that are interested in CC1101-Weather-Receiver are comparing it to the libraries listed below
Sorting:
- An Arduino library for the RFM69 transceiver module that enables communications with Davis Instruments weather station hardware.☆95Updated 2 years ago
- I2C based soil moisture sensor☆248Updated 2 years ago
- To measure battery voltage, engine RPM, fuel level and exhaust teperature with an ESP32 and send it to a NMEA 2000 network.☆65Updated 3 years ago
- An Actisense NGT-1 compatible NMEA 2000 USB gateway for the SH-ESP32☆32Updated 2 years ago
- Sailor Hat for ESP32 hardware☆48Updated last year
- nmea2000 gateway with ESP32☆85Updated last month
- Inherited object for use NMEA2000 with ESP32 boards☆88Updated last year
- Arduino flow meter library that provides calibrated liquid flow and volume measurement with flow sensors.☆107Updated 11 months ago
- Moteino Eagle project and library☆132Updated 5 years ago
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆130Updated 4 years ago
- Lightweight arduino library to read basic data using the VE.Direct protocol from Victron Energy☆95Updated 2 years ago
- Arduino-compatible MCU firmware code for sensor-, telemetry-, and gateway-appliances.☆49Updated 2 years ago
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app.☆67Updated 6 years ago
- GPS fueled ESP8266 based NTP Server☆72Updated 5 years ago
- Symbol libraries for MySensors-related components☆18Updated 8 years ago
- To measure temperature and barometric pressure with a BMP280 sensor and send it to NMEA2000 network.☆16Updated 2 years ago
- Arduino client for esp-link's REST, MQTT, and command interface☆87Updated 5 years ago
- An M-bus master that poll a meter and logs data to an MQTT server☆52Updated 9 years ago
- Low Power Library for Arduino☆105Updated 2 years ago
- ☆30Updated 3 years ago
- An arduino sketch to connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266 and monitor using the Blynk mobile app - …☆61Updated 4 years ago
- ☆33Updated 4 years ago
- Simple Arduino Library for the I2C Soil Moisture Sensor version from Chirp (https://github.com/Miceuz/i2c-moisture-sensor)☆74Updated 6 years ago
- Demo Arduino code to test the ATM90E26 breakout☆58Updated 2 years ago
- This repository shows how to build a NMEA2000 WiFi Gateway with voltage and temperature alarms.☆88Updated 3 years ago
- An Arduino library for logging to Syslog server in IETF format (RFC 5424) and BSD format (RFC 3164)☆121Updated 3 years ago
- Communicating with Victron energy products, also compatible with other inverters and solar equipement☆21Updated 7 years ago
- ESP8266 WIFI serial to emoncms link☆166Updated 2 years ago
- Open-source Heatpump Monitor☆77Updated last year
- Universal Signal K sensor framework for the ESP32 platform☆186Updated 3 months ago