Alternatives and similar repositories for newlib

Users that are interested in newlib are comparing it to the libraries listed below

• lupyuen / pi-swd-spi
  Implementation of SWD protocol with Raspberry Pi Bidirectional SPI
  ☆17Updated 6 years ago
• lundmar / riscv-gd32vf103-demo
  Simple demo firmware for the RISC-V GD32VF103
  ☆29Updated 5 years ago
• lucasdietrich / AVRTOS
  AVRTOS is a sandbox real-time operating system (RTOS) designed for 8-bit AVR microcontrollers. Inspired by the Zephyr RTOS project. It is…
  ☆47Updated 3 weeks ago
• cortexprog / cortexprogfw
  ☆29Updated 5 years ago
• WRansohoff / ESP32_minimal
  Minimal code for a 'bare metal' ESP32 program which does not use ESP-IDF. Really just a learning exercise because the ESP-IDF is Apache-l…
  ☆49Updated 6 years ago
• kprasadvnsi / riscv-openocd-wch
  OpenOCD source code for CH32V series MCUs released by Mounriver IDE
  ☆55Updated 3 years ago
• jotux / GccMapVisualizer
  Gcc linker map visualizer
  ☆28Updated 10 years ago
• michahoiting / rv-link
  RV-Link: In application debugger for RISC-V micro-controllers, RISC-V emulator, running on RISC-V development boards (e.g. Sipeed Longan …
  ☆31Updated 5 years ago
• esmil / gd32vf103inator
  Program the GD32VF103 using C, your favourite editor and make
  ☆51Updated 2 years ago
• espressif / esp32c3-direct-boot-example
  Example of ESP32-C3 (rev. 3 and later) "direct boot" feature.
  ☆76Updated 2 years ago
• debug-edge / DebugEdge
  A small bridge to link a SWD programmer to an AVX Open Ended Card Edge connector.
  ☆43Updated 5 years ago
• FreddieChopin / bleeding-edge-toolchain
  All-in-one script to build bleeding-edge-toolchain for ARM microcontrollers
  ☆81Updated last year
• iliasam / fake86_to_stm32f429_port
  8086 PC (x86) emulator for STM32F429 MCU
  ☆33Updated 2 years ago
• FantomJAC / quakembd
  Quake for embedded devices
  ☆43Updated 4 years ago
• aehparta / ftdi-bitbang
  Bitbang interfacing through FTx232 chips
  ☆25Updated 3 years ago
• carrotIndustries / svdregview
  Point-and click access to MCU peripheral registers
  ☆24Updated 3 years ago
• lupyuen / stm32bluepill-unittest
  Unit test for STM32 Blue Pill. Based on PlatformIO, libopencm3, unity and Qemu
  ☆16Updated 7 years ago
• embeddedartistry / printf
  Tiny, fast(ish), self-contained and fully loaded printf, sprinf etc. implementation, mainly for embedded systems.
  ☆22Updated 11 months ago
• felias-fogg / dw-link
  An Arduino-based debugWIRE hardware-debugger
  ☆80Updated last week
• kprasadvnsi / ch55x_bare_metal
  Simple peripheral library for CH55x microcontrolles
  ☆16Updated 4 years ago
• Thuffir / xmodem
  XMODEM with binary mode and 1K option and a sample YMODEM implementation.
  ☆36Updated 6 years ago
• farpatch / farpatch
  Farpatch debugger software layer, backed by Black Magic
  ☆57Updated last week
• xhackerustc / uc-rv32ima
  Run Linux on MCUs such as ESP32C3 with RISC-V emulator
  ☆127Updated last year
• mubes / vidout
  VGA Video output on CORTEX-M3. Vidout provides 50 x 18 text output on a STM32F103 CPU (e.g. BluePill) using only 24% of the CPU, 1.2K of…
  ☆54Updated 3 years ago
• 1Bitsy / 1bitsy-examples
  Example projects for the 1BitSy development boards.
  ☆37Updated 2 years ago
• raspberrypi / armulet
  ☆22Updated 6 months ago
• perexg / picoprobe-sump
  ☆41Updated 4 years ago
• lupyuen / send_altitude_cocoos
  IoT program for Arduino Uno / STM32 Blue Pill (libopencm3) that reads BME280 temperature + humidity + altitude sensors, via I2C or SPI wi…
  ☆25Updated 7 years ago
• mkvenkit / humble_ice
  A low cost FPGA development board based on Lattice iCE40UP5k and Raspberry Pi RP2040.
  ☆45Updated 3 years ago
• adafruit / M.2
  Discussion, files, spec, and more for a M.2 standard for makers
  ☆34Updated 5 years ago