Alternatives and similar repositories for bldc-hardware

Users that are interested in bldc-hardware are comparing it to the libraries listed below

• antonchromjak / MINI4
  ☆130Updated 7 years ago
• galpavlin / BESC-G2
  BESC second generation
  ☆52Updated 4 years ago
• paltatech / VESC-controller
  ☆341Updated 2 years ago
• galpavlin / BESC
  High voltage high power ESC using VESC logic
  ☆56Updated 6 years ago
• azmat-bilal / bldc_motor_controller_pcb
  A Brushless DC Motor controller board. The design is inspired and is compatible with Odrive project (https://github.com/madcowswe/ODriveH…
  ☆107Updated 5 years ago
• shamansystems / Cheap-FOCer-2
  Low-Cost Motor Controller based on the VESC 6
  ☆373Updated 2 years ago
• shamansystems / Cheap-FOCer
  BLDC Motor Controller based on the VESC 4.12 hardware
  ☆74Updated 5 years ago
• TechAUmNu / A200S
  A200S ESC - Based upon the VESC®*-Project
  ☆54Updated 7 years ago
• badgineer / MP2-ESC
  Multi-Platform, Modular, Powerful ESC
  ☆131Updated last year
• maakbaas / mbldc
  Custom PCB design and firmware, which serve as a ESC or BLDC controller, to drive brushless BLDC motors using my own control algorithms.
  ☆80Updated 3 years ago
• pitronicteam / FOC_ESC-hardware
  FOC_ESC hardware design repository
  ☆113Updated 6 years ago
• DieBieEngineering / DieBieMS
  Electric skateboard oriented battery management system.
  ☆354Updated 7 years ago
• mpater / bldc-BMS
  Battery management system for a VESC
  ☆26Updated 6 years ago
• mrkindustries / bldc
  Brushless DC Motor controller from Benjamin Vedder
  ☆105Updated 9 years ago
• vedderb / nrf51_vesc
  BLE-UART bridge for the VESC with packet handling and VESC Tool compatibility
  ☆73Updated last year
• vedderb / vesc_gpstm
  General purpose STM32G4-codebase that works with VESC Tool
  ☆20Updated last year
• davidmolony / MESC_FOC_ESC
  MESC, Molony ESC, STM32F303 based FOC+BLDC ready, HALL, Encoder, Sensorless, single sides, 2 layer, ~90A @48V
  ☆50Updated 4 years ago
• makerbase-mks / VESC-MKS
  ☆53Updated 2 years ago
• makerbase-mks / MKS-SERVO42B
  MKS SERVO42B is 3d printer closed loop stepper motor NEMA17 MKS SERVO42 developed by Makerbase that prevents losing steps. CPU is STM32F1…
  ☆181Updated 4 years ago
• vedderb / vesc_express
  The source code for the VESC Express
  ☆64Updated 3 weeks ago
• bluerobotics / BlueESC
  Simple, open-source ESC that uses the SimonK firmware.
  ☆202Updated 9 years ago
• jaxxzer / open-esc-firmware
  ☆62Updated 5 years ago
• DizzyRobot / DirectServo
  Controller that drives BLDC motor as servo
  ☆74Updated 6 years ago
• fishpepper / tinyPEPPER
  a tiny 16x16mm hole-to-hole 4in1 brushless ESC running BLHeli_s
  ☆73Updated 8 years ago
• ottoragam / Tarocco
  Closed Loop Motor Controller
  ☆135Updated 4 years ago
• vedderb / nrf52_vesc
  BLE-UART bridge for the VESC with packet handling and VESC Tool compatibility.
  ☆41Updated 2 years ago
• 3x8 / nostromo
  BLDC ESC firmware (GPLv3.0)
  ☆51Updated 5 years ago
• lucysrausch / ottercontrol
  Hardware files for OtterControl BLDC motor controller
  ☆67Updated 2 months ago
• AlkaMotors / f051bldc
  brushless motor control stm32f051
  ☆71Updated 5 years ago
• g-rahul / Nucleo-G431RB-Custom_inverter-V1
  Project Includes both firmware and PCB design tool for 3 Phase BLDC motor Control - FOC
  ☆19Updated 5 years ago