Alternatives and similar repositories for GPSLogger

Users that are interested in GPSLogger are comparing it to the libraries listed below

• lansalot / FreeRTK
  How to set up your own RTK base station
  ☆41Updated last year
• OpenMarine / MacArthur-HAT
  The open source hardware gateway for OpenPlotter
  ☆28Updated 11 months ago
• eringerli / RpiNtripBase
  ☆50Updated 4 years ago
• bitsmashed / gps_tracker
  GPS NMEA parser and map plotter.
  ☆38Updated 12 years ago
• incarvr6 / esp32-ntrip-DUO
  ESP32 NTRIP Interface
  ☆53Updated 3 months ago
• AK-Homberger / NMEA0183-WiFi-Multiplexer
  Reads NMEA0183 messages from two serial lines and forwards multiplexed messages to USB-Serial and WLAN as UDP broadcast.
  ☆12Updated 2 years ago
• kanflo / ADS-B-funhouse
  A collection of scripts for playing with ADS-B data
  ☆56Updated 4 months ago
• Coffeetrac / AG_NTRIP_ESP
  AG Rooftop controller with NTRIP client and IMU (ESP32 Controller)
  ☆39Updated 6 years ago
• itemir / rpi_boat_utils
  Utilities for Raspberry Pi, mostly for usage on a boat. Includes UART control scripts, traffic measurement tools for Mikrotik (RouterOS) …
  ☆90Updated last year
• emlid / ntripbrowser
  CLI tool to easily get NTRIP caster information
  ☆33Updated 2 years ago
• slgrobotics / Esp32_RTK_BaseStation
  Esp32 RTK BaseStation - sends u-Blox ZED-F9P RTCM correction data to rtk2go.com NTRIP caster
  ☆31Updated 2 years ago
• Node-NTRIP / caster
  Node.js NTRIP caster library with full NTRIP V1/V2 support and more.
  ☆51Updated 2 years ago
• Korving-F / ublox
  Python library for the UBX protocol
  ☆38Updated 4 years ago
• taroz / TouchRTKStation
  Single-Frequency RTK-GNSS Rover/Base Station based on RTKLIB
  ☆94Updated 6 years ago
• markfickett / gpslogger
  Arduino GPX logger: Use TinyGPS to read NMEA from a GPS module and SdFat to write it to an SD card.
  ☆16Updated 10 years ago
• jpmens / pico
  ☆29Updated 5 years ago
• emlid / ReachView
  Reach-hosted web-interface for RTKLIB
  ☆59Updated 5 years ago
• luk-kop / nmea-gps-emulator
  The NMEA-GPS Emulator is a simple script that emulates a GPS receiver (simulates unit's movement). Data generated by the script are sent …
  ☆39Updated 7 months ago
• AK-Homberger / NMEA2000-VoyageDataRecorder
  This is the develoment space for a NMEA 2000 Voyage Data Recorder based on an ESP32 with CAN bus and SD card. The logger is using a SN65H…
  ☆26Updated 4 years ago
• rdlauer / pispeedtrap
  Using Edge Impulse, a Raspberry Pi, and a Notecard for cellular data, this IoT project lets you set up a portable speed trap to measure t…
  ☆35Updated 3 years ago
• nebkat / esp32-xbee
  ESP32 XBee UART Interface
  ☆101Updated 2 years ago
• KimBP / AIS
  An Arduino library able to decode AIS messages
  ☆30Updated 2 years ago
• HomegrownMarine / boat_computer
  Platform for processing and interacting with boat sensor data. Runs on Raspberry Pi or BeagleBone Black.
  ☆39Updated 9 years ago
• har-in-air / ESP32_IMU_BARO_GPS_LOGGER
  ESP32 high-speed flash data logger for IMU (accelerometer+gyro+magnetometer), GPS, pressure sensor readings.
  ☆20Updated 5 years ago
• jangleboom / RTKBaseStation
  Real time kinematics base station (ESP32 + ZED-F9P)
  ☆35Updated 2 years ago
• PaulZC / F9P_RAWX_Logger
  A guide on how to assemble a GNSS PPK RAWX Logger from an Adafruit Feather M0 Adalogger and a SparkFun GPS-RTK2 Board which incorporates …
  ☆34Updated 5 years ago
• CheapskateProjects / GPSLogger
  Simple project which logs data from GPS module (NEO 6M) into SD card.
  ☆9Updated 8 years ago
• mnltake / gpsnavi
  RTK-GPS/GNSS guidance for agriculture tractor by python code
  ☆16Updated 3 years ago
• PaulZC / ZED-F9P_FeatherWing_USB
  A GNSS FeatherWing incorporating the u-blox ZED-F9P. Provides access to the ZED-F9P's USB, I2C, UART1 and UART2 ports.
  ☆23Updated 10 months ago
• mayeranalytics / pyUBX
  Python library for parsing/generating u-blox UBX protocol messages, and for creating parsers/generators in other languages.
  ☆90Updated 4 years ago