Alternatives and similar repositories for powerblade

Users that are interested in powerblade are comparing it to the libraries listed below

• lab11 / permamote
  New generation >10-year lifetime sensor node
  ☆29Updated 2 years ago
• soldernerd / SolarChargerHardware
  Various versions of my MPPT Solar Charger
  ☆59Updated 7 years ago
• msolters / arduino-at86rf233
  Simple Arduino driver for the AT86RF233 802.15.4 radio module, ported to C++ from RIOT-OS
  ☆11Updated 7 years ago
• limpkin / cdm324_backpack
  CDM324 Amplification Backpack, With Case and Simulations
  ☆61Updated 8 years ago
• ARMmbed / mbed-semtech-lora-rf-drivers
  Semtech's LoRa RF drivers for mbed OS
  ☆34Updated 5 years ago
• al177 / esp_hat
  ESP8266 based Raspberry Pi WiFi module
  ☆25Updated 9 years ago
• Protocentral / protocentral_sensything
  Sensything is an ESP32-based IoT device that has multiple sensor interfaces to read from and send data from both analog and digital senso…
  ☆20Updated 6 years ago
• jocelynmass / nrf51
  nrf51822 GCC based projects
  ☆29Updated 6 years ago
• procule / IRAnalyzer
  InfraRed Analyzer plugin for Saleae Logic software
  ☆26Updated 11 years ago
• cjhdev / lora_device_lib
  A LoRaWAN Device Library
  ☆34Updated last year
• google / stm32_bare_lib
  System functions and example code for programming the "Blue Pill" STM32-compatible micro-controller boards.
  ☆134Updated 4 years ago
• jadonk / PocketBone
  Smalls mint tin sized BeagleBone
  ☆58Updated 8 years ago
• NordicPlayground / solar_sensor_beacon
  ☆30Updated 8 years ago
• google / prudaq
  PRUDAQ is an open source 40MSPS (megasamples per second) Data Acquisition board for the Beaglebone Black/Green
  ☆123Updated 9 years ago
• alexforencich / python-ivi
  A Python implementation of the Interchangeable Virtual Instrument standard.
  ☆55Updated 5 years ago
• FaradayRF / FaradayRF-Hardware
  Faraday hardware design files
  ☆42Updated 8 years ago
• ZakKemble / Si446x
  Si4463 Radio Library for AVR and Arduino
  ☆80Updated last year
• ahessling / RFM69-STM32
  A protocol agnostic library for HopeRF's RFM69 modules and STM32 controllers
  ☆67Updated 8 years ago
• femtoduino / femto-beacon
  FemtoBeacon - Atmel SAM R21 (ARM Cortex M0+, SAM D21 with built in AT86RF233)
  ☆66Updated 5 years ago
• anthonywebb / RFM92
  RFM92W/93W - Arduino Powered Low Power Long Range LoRa Transceiver
  ☆26Updated 11 years ago
• OLIMEX / KiCAD
  Olimex KiCAD components and footprints
  ☆71Updated 3 months ago
• electronut / ElectronutLabs-bluey
  Nordic nRF52832 BLE development board with sensors.
  ☆96Updated 6 years ago
• mwelling / pocketbone-kicad
  Smalls mint tin sized BeagleBone (KiCAD version)
  ☆58Updated 6 years ago
• azerimaker / Penguino-SAMR34
  This repo contains all the necessary design and fabrication files for the Penguino SAMR34 RF module and its Feather breakout board.
  ☆61Updated 5 years ago
• rayshobby / squarewear
  SquareWear is an open-source wearable electronics controller board. This repository contains the hardware design files, software library,…
  ☆37Updated 8 years ago
• lab11 / nrf5x-base
  Starting point and shared code for Nordic nRF5x BLE platforms.
  ☆91Updated 4 years ago
• hallard / RPI-Lora-Gateway
  Raspberry PI Lora Gateway/Node for RFM92/95/96/98/69HCW Modules
  ☆62Updated 9 years ago
• LibreSolar / rpi-can
  CAN bus interface for Raspberry Pi (Zero W)
  ☆25Updated 7 years ago
• SDI-SoftwareDefinedInverter / TAPAS
  Community drives inverter project
  ☆135Updated 5 years ago
• imciner2 / KiCad-Libraries
  KiCad schematic symbols and footprints for various projects.
  ☆63Updated 6 years ago