Alternatives and similar repositories for ISO-port:

Users that are interested in ISO-port are comparing it to the libraries listed below

• crteensy / STM32F030F4P6-breakout-board
  STM32F030F4P6 breakout board pcb files and example code
  ☆14Updated 9 years ago
• wigman27 / Arduino-Programmable-Constant-Current-Power-Resistance-Load
  This is all of the code, datasheets and design files for my instructable
  ☆37Updated 8 years ago
• hwstar / HW-AC-Emeter
  Hardware for an ESP8266 or Arduino based AC power meter using the Atmel 90E24 energy management chip
  ☆53Updated 9 years ago
• al177 / esp_hat
  ESP8266 based Raspberry Pi WiFi module
  ☆26Updated 9 years ago
• mike-rankin / SAMD21G18A_Sensor_Board_with_Color_Oled
  SAMD21G18A Sensor Board with Color Oled
  ☆10Updated 7 years ago
• martonmiklos / EAGLE-libraries
  Collection of my libraries for the Autodesk EAGLE CAD tool
  ☆22Updated 3 years ago
• technoblogy / tiny-mega-i2c
  Minimal I2C master routines for the new AVR microcontrollers.
  ☆22Updated 2 years ago
• jrsikken / ElectronicLoadR2
  Hardware of Jasper's Electronic Load R2
  ☆21Updated 6 years ago
• bertrik / ElectronicLoad
  Arduino software for an electronically controlled load, based on a STM32 microcontroller
  ☆21Updated 4 years ago
• arachnidlabs / reload-pro
  Schematics and code for the Re:load Pro
  ☆99Updated 8 years ago
• s54mtb / lora_breakout
  Breakout board for LoRa all-in-one module CMWX1ZZABZ
  ☆12Updated 4 years ago
• electronut / ElectronutLabs-Bumpy
  An inexpensive Open Source blackmagic probe compatible SWD debugger designed to be used with ARM GDB.
  ☆35Updated 5 years ago
• wdim0 / esp8266_with_KeDei_lcd_module
  ESP8266 with 3.5" KeDei LCD module
  ☆43Updated 8 years ago
• hwstar / esp12-appliance_mod
  Hardware implementation for the esp8266-MQTT-io-node firmware
  ☆23Updated 9 years ago
• smdprutser / GD32Challenge
  ☆19Updated 6 years ago
• drewfish / arduino-ZeroRegs
  print out the low-level configuration registers for the Arduino Zero (and similar boards)
  ☆24Updated 4 years ago
• kodera2t / Magical_tweezersIV
  ☆24Updated 8 years ago
• sparkfun / SAMD21_Mini_Breakout
  A miniature SAM21G Breakout, in the form factor/pin-out of a Pro Mini.
  ☆42Updated 2 years ago
• LowPowerLab / DualOptiboot
  Custom Optiboot to add wireless programming capability to Moteino
  ☆72Updated 4 years ago
• kanflo / espism
  A low cost ISM radio to wifi gateway
  ☆41Updated 5 years ago
• cbm80amiga / STM32_TFT22_terminal_RRE
  Minimalistic terminal based on STM32 and ILI9341 2.2" LCD
  ☆38Updated 7 years ago
• littlewire / Little-Wire
  Little Wire is multi-featured USB controlled open source hardware tool packed in a minimal form factor designed by ihsan Kehribar.
  ☆101Updated 7 years ago
• baoshi / KiCad
  KiCad libraries used by my projects
  ☆13Updated last year
• s54mtb / LoRaDunchy
  Lora board with Arduino nano compatibile pinout and simple battery management
  ☆35Updated 6 years ago
• Show-vars / msp430-radio
  SX1276 transceiver test code for MSP430G2553
  ☆15Updated 7 years ago
• cnlohr / esp8266duplexi2s
  Generic duplex communication on the I2S bus in the ESP8266.
  ☆30Updated 9 years ago
• thiseldo / cryptoauth-arduino
  An Arduino library for Atmel's ATSHA204A, ATECC508A
  ☆30Updated 9 years ago
• nerdralph / nerdralph
  Automatically exported from code.google.com/p/nerdralph
  ☆49Updated 3 years ago
• nsayer / Toast-R-Reflow
  Toaster oven reflow soldering controller
  ☆27Updated 6 years ago
• whatnick / ATM90E26_Breakout
  Breakout Board for ATMEL M90E26 single phase energy monitor
  ☆15Updated 7 years ago