Alternatives and similar repositories for SCIO-read:

Users that are interested in SCIO-read are comparing it to the libraries listed below

• GaudiLabs / 3DFiberSpectrometer
  Fully 3D printed fibre spectrometer. The spectrometer is a scientific instrument used to separate and measure components of light. The op…
  ☆23Updated last month
• im-pro-at / Etch-a-Selfie
  ESP32_CAM meets Etch-A-Sketch => Etch-a-Selfie
  ☆12Updated 5 years ago
• Stan-Reifel / TinyStepper_28BYJ_48
  28BYJ-48 Stepper motor control library for Arduino
  ☆24Updated 4 years ago
• blablabliam / ZapCapture
  GUI-Based Lightning Frame Extractor for Stormchasers and Photographers. ⚡
  ☆28Updated 5 months ago
• joshmaceachern / OSMMPump
  Open-Source Multichannel Microfluidics Pump. Developed as a research project to create a system that can precisely deliver fluids at a re…
  ☆11Updated 3 years ago
• roberttidey / caliperEsp
  ESP8266 wifi add on for digital calipers
  ☆11Updated 3 years ago
• kriswiner / AS7265X
  18-channel, 40-nm FWHM spectrometer
  ☆19Updated 4 years ago
• ThingEngineer / Laser-XY-Scanner
  Low Cost DIY Laser XY Scanner, Cutter, or Engraver
  ☆40Updated 3 months ago
• technoblogy / universal-tft-display-backpack
  A microcontroller board that can accommodate a range of different colour TFT displays.
  ☆18Updated 2 years ago
• daveake / S7xG
  HAB Firmware for the S7xG board in the LilyGo Watch, to provide basic GPS and LoRa for UKHAS telemetry
  ☆20Updated 4 years ago
• TheZeroOneOfficial / The_Ultimate_Component_Storage_System
  The Ultimate Component Storage System is a unique solution for organizing and storing electronic components.
  ☆48Updated 2 years ago
• ErichStyger / MetaClockClock
  Project to build a clock with clocks: the Meta Clock Clock
  ☆37Updated last week
• anfractuosity / lightfantastic
  led mapping using ws2812 led strips and a raspberry pi. The leds transmit encoded data, which is decoded from video to determine the led…
  ☆31Updated 5 years ago
• SMerrony / picowpanel
  Raspberry Pico W RGB Matrix Information Display driven by MQTT
  ☆10Updated 6 months ago
• electronlove / 3D_Scanner
  Files and Settings for 3D scanner HAT
  ☆18Updated 4 years ago
• BigCorvus / SX1262-LoRa-BLE-Relay
  A LoRa to BLE relay in 2 versions based on the new SX1262 chipset and an nRF52840. It can run Meshtastic already
  ☆18Updated 4 years ago
• roundsToThree / Camsense-X1-Previewer
  An app to preview incoming data from the Camsense® X1 LIDAR Scanner.
  ☆13Updated 4 years ago
• limpkin / xt60_parallelizer
  a custom board to monitor custom battery packs
  ☆16Updated 10 months ago
• kingoflolz / linear-actuator-firmware
  ☆29Updated 2 years ago
• Foalyy / silver-firmware
  Firmware for the Silver open-source, long-range camera remote control
  ☆15Updated 4 years ago
• xoseperez / my92xx
  MY9291 and MY9231 LED driver library for Arduino AVR and ESP8266
  ☆38Updated 5 years ago
• HackyDev / vibrotactile-stimulator
  This DIY device is for vibrotactile stimulation and consists of 8 vibration modules and a NodeMCU controller. The frequency, vibration du…
  ☆13Updated last year
• IcingTomato / micropython_xiao_esp32c3
  MicroPython for Seeed XIAO-ESP32C3
  ☆23Updated 2 years ago
• goodrobotics / wifistepper
  Wi-Fi Stepper project repo
  ☆27Updated last year
• 2dof / esp_control
  Standard PID control library for esp32 Micropython platform
  ☆18Updated 9 months ago
• sepp89117 / GoProRC_ESP32
  Allows simultaneous control of up to 8 GoPro cameras
  ☆18Updated 4 months ago
• kf4mot / 10mhz_distributor
  10 MHz 3 channel distribution amplifier and low pass filter designed to integrate in a BG7TBL GPSDO
  ☆10Updated 3 years ago
• adafruit / Adafruit-ESP32-HUZZAH-Breakout-PCB
  PCB files for Adafruit ESP32 Huzzah Breakout.
  ☆11Updated 2 years ago
• ggerganov / ggwave-arduino
  Mirror of ggwave used in the Arduino Library Manager
  ☆52Updated 2 years ago
• Halogenek / microscope-lamp
  USB-C powered LED fixture that fits on top of a microscope objective
  ☆14Updated last year