perivar / rc-switchLinks
Arduino lib to operate 433/315Mhz devices like power outlet sockets.
☆11Updated last year
Alternatives and similar repositories for rc-switch
Users that are interested in rc-switch are comparing it to the libraries listed below
Sorting:
- ☆44Updated 4 years ago
- RFLink for ESP, with MQTT client☆75Updated 2 years ago
- Plugin ideas, concepts, user contributed, etc☆195Updated last year
- My personal Workspace for Mysensors HW☆35Updated 5 years ago
- Home Assistant / Domoticz tested with a RFLink, modified for ESP8266 and ESP32☆110Updated 4 years ago
- RF433Mhz decoding library☆61Updated 2 years ago
- ESPiLight - pilight 433.92 MHz protocols library for Arduino☆124Updated 2 years ago
- Arduino library to control non-smart roller shutters using time☆61Updated 5 years ago
- esp32-based mqtt node to control EQ-3 BLE TRVs☆144Updated 4 years ago
- ESP8266 MQTT SDM ModBus Energy Meter☆22Updated 7 years ago
- Device to measure energy and temperature☆81Updated 6 years ago
- reading SDM72 SDM120 SDM220 SDM230 SDM630 modbus energy meters from arduino (esp8266, esp32, avr)☆260Updated last year
- Plugin for a rapid development of battery-powered sensors☆135Updated 3 years ago
- ESP8266 based Roller-Shutter- / Intermediate-Switch flush-mounted Module☆34Updated 5 years ago
- Code to read the VE.Direct-Protocol from serial into a value array. Uses a non-blocking read loop and does checksum verification before a…☆131Updated 4 years ago
- Use an ESP8266 to read live-, statistical- and status-data from an EpEver LandStar (LS1024B) via Modbus and publish using MQTT☆32Updated 7 years ago
- PCB☆61Updated 3 years ago
- Bridge from RFLink to an mqtt broker using ESP8266 programmed with arduino IDE☆38Updated 7 years ago
- ☆23Updated 8 years ago
- Zigbee light switch with dim support base on chip cc2530☆93Updated 5 years ago
- Control Roomba with esp8266 webinterface and simple API☆126Updated 8 years ago
- ESP-12(E/F) based controller for WLED or other neopixel things☆41Updated last year
- ☆11Updated 8 years ago
- ESP8266 based bidirectional bridge between MQTT and IR (change MQTT message to IR signal and change received IR signal to MQTT message)☆144Updated 5 years ago
- WebSocket and MQTT supported device code for the roller blind. As rework of the design and code is on its way there won't be any updates …☆114Updated 6 years ago
- ☆109Updated last year
- Arduino library for read weather data from Venus W174/W132 (tested), Auriol H13726, Hama EWS 1500, Meteoscan W155/W160☆27Updated 4 months ago
- Readout of EMS protocol datagrams and transfer of data to Domoticz via Arduino☆90Updated 4 years ago
- Connect the EPSolar/EPEver Tracer A/B Series (RS-485 Modbus) to an ESP8266/ESP32 and monitor using Blynk /Homeassistant/MQTT... .☆58Updated 3 months ago
- A library that provides tools to simplify MQTT discovery implementation for Home Assistant to your device.☆48Updated last year