karlp / ch341-linuxLinks
notes on adding parity control to ch341 linux usb serial driver
☆24Updated 6 years ago
Alternatives and similar repositories for ch341-linux
Users that are interested in ch341-linux are comparing it to the libraries listed below
Sorting:
- Use the arduino as a JTAG adaptor with Tjtag☆47Updated 4 years ago
- An Eclipse project template for bare metal development of ARM Cortex M processors.☆42Updated 12 years ago
- ☆22Updated 8 years ago
- Free Libre Open-Source/-Hardware JTAG/UART adapter based on FTDI2232H☆31Updated 8 years ago
- STM32 related gubbins☆15Updated 9 years ago
- Raspberry PI bare metal☆47Updated 11 years ago
- FX2 EZ USB eeprom reader/writer for libusb☆29Updated 2 years ago
- ATMega16U2 firmare - faster than arduino-usbserial☆22Updated 9 years ago
- The sigrok project aims at creating a portable, cross-platform, Free/Libre/Open-Source logic analyzer software that supports various logi…☆20Updated 12 years ago
- Teensy 3.1 doing serprog with LPC and SPI (and FWH...)☆13Updated 9 years ago
- Converts an Eagle 6.0+ .brd into a kicad .brd☆93Updated 8 years ago
- Very old copy of avrdude. Go to the official website for support.☆100Updated 7 years ago
- Armstart's CMSIS-DAP firmware implementation in gcc and makefile. Note: this is not the original Armstart repo☆26Updated 5 years ago
- ☆51Updated 2 years ago
- Drive an old laptop display from an 8-bit AVR microcontroller☆20Updated 9 years ago
- A stable ESP8266 port of OpenOCD☆54Updated 5 years ago
- An implementation of the SWD protocol using the Bus Pirate☆89Updated 7 years ago
- RTL00(RTL8710AF) Test MP3☆30Updated 7 years ago
- The JTAGduino project has the goal of using Arduino as a JTAG interface.☆114Updated 10 years ago
- uClinux for STM32F746G-DISCO board support, work done in context of FP7 Dreams project at TEI Crete☆23Updated 9 years ago
- Emulates a Bus Pirate OpenOCD JTAG adapter with an Arduino Due☆49Updated last week
- A powerful userspace command-line tool to interface with Nordic's nRF24LE1 through SPI bus. Currently made for RaspberryPi.☆39Updated 6 years ago
- vAVRdisasm is an 8-bit Atmel AVR disassembler.☆76Updated 6 years ago
- PL2303HX Userspace GPIO control tool☆35Updated 4 years ago
- Yes, your Arduino can replace an expensive JTAG cable!☆154Updated 11 years ago
- SD/MMC Analyzer for Logic☆45Updated 3 years ago
- Bootloader firmware for the Maple ARM Cortex-M3 development board from LeafLabs☆140Updated 11 years ago
- Reverse engineered reimplementation of the CSR USB<>SPI converter device on a Stellaris Launchpad. Will work with the original CSR driver…☆57Updated 11 years ago
- ST-Link dumper firmware☆52Updated last year
- SourceCode for DSO Quad HWv2.6☆74Updated 7 months ago