jskgautam / Model_Phased_Array_AntennaLinks
Modelling An Antenna Array: Using Python programming language- Numpy and Matplotlib. Directing radio waves in a particular direction by adjusting their number, geometrical arrangement, and relative amplitudes and phases.
☆13Updated 3 years ago
Alternatives and similar repositories for Model_Phased_Array_Antenna
Users that are interested in Model_Phased_Array_Antenna are comparing it to the libraries listed below
Sorting:
- UHF active noise radar☆22Updated 4 years ago
- Access and cotrol of PlutoSDR hardware using python bindings to libiio☆33Updated 5 years ago
- File Transfer with ADALM Pluto SDR☆32Updated 6 months ago
- ☆17Updated 4 years ago
- Docker image for GNU Radio with ADALM-PLUTO SDR☆18Updated 6 years ago
- DIY digital beamformer using ADALM-PLUTO☆85Updated 2 months ago
- Software Defined Radar with GNURadio Companion☆73Updated 6 years ago
- ADRV90xx Getting Started Info☆12Updated 5 years ago
- Hands on labs for the ADALM Pluto SDR☆69Updated 3 years ago
- ☆38Updated last year
- pluto-adsb-sim generates ADSB signal IQ data stream, which is then transmitted by the software-defined radio (SDR) platform ADALM-Pluto.☆25Updated 5 years ago
- Turning cheap(ish) Pluto-SDR receivers into passive radar sensors☆21Updated last year
- 6GHz frequency-modulated continuous-wave radar with real-time range detection☆51Updated 4 years ago
- Small scripts and examples to make interacting with the PlutoSDR easier☆91Updated 11 months ago
- Passive radar measurements using synchronized RTL-SDR DVB-T receivers☆50Updated last year
- This repo is a compilation of code and resources for multiple SDR Platforms as part of a phased array beamforming project.☆60Updated last year
- ☆20Updated 6 years ago
- FPGA code and Python API for adding chirp functionality to USRP N210 with CBX daughter board, after the required hardware modification.☆33Updated last year
- ☆22Updated last year
- Hardware for OreSat's SDR GPS receive and other SDR GPS projects☆29Updated last year
- 10 GHz Phased Array beamforming labs☆141Updated 4 years ago
- Main transceiver application☆31Updated 4 years ago
- A module adding spectral estimation routines to GNU Radio.☆60Updated 5 years ago
- multi MAX2771 GNSS receiver☆41Updated 2 months ago
- A simple OFDM Radar implementation☆52Updated 3 years ago
- GNURadio & scripts for ADALM-Pluto - DATV TX☆43Updated 5 years ago
- CST design files of antennas used in my researches and projects.☆132Updated 6 years ago
- Open-source software platform for cognitive radio waveforms☆24Updated 9 years ago
- Using Software Designed Radio to transmit LTE downlink signals at 2.4 GHz☆44Updated 6 years ago
- MATLAB toolbox for ADI transceiver products☆63Updated 5 months ago