Alternatives and similar repositories for PiZeroHub

Users that are interested in PiZeroHub are comparing it to the libraries listed below

• todbot / NeoJoints
  Neopixel Joints, millable on the Othermill
  ☆27Updated 8 years ago
• idlehandsdev-backup / samd_hcc_mod
  A SAMD21G18 based easy to solder module.
  ☆73Updated 6 years ago
• sparkfun / Arduino_Pro_Mini_328
  SparkFun's Arduino Pro Mini 328 is a bare bones super small Arduino compatible development board.
  ☆102Updated 6 years ago
• sparkfun / Tiny-AVR-Programmer
  Hardware files for the Tiny AVR Programmer
  ☆74Updated 6 years ago
• Seeed-Studio / ArduinoPhone
  ArduinoPhone, a phone with Seeeduino, and GPRS Shield , and TFT Touch Shield!!!
  ☆47Updated 10 months ago
• pimoroni / eagle
  Custom Eagle parts that we've created where needed. Please feel free to use, extend, and share! (CC v3.0 Share-Alike You are welcome to u…
  ☆42Updated 2 weeks ago
• watterott / RPi-DPI-HAT
  Display Parallel Interface HAT (Hardware Attached on Top) for Raspberry Pi
  ☆18Updated 5 years ago
• todbot / arduino-i2c-scanner
  Simple Arduino I2C scanner as described at http://todbot.com/blog/2009/11/29/i2cscanner-pde-arduino-as-i2c-bus-scanner/
  ☆75Updated 9 years ago
• psychogenic / SerialUI
  A Serial User Interface for embedded devices, namely Arduinos.
  ☆50Updated 6 years ago
• adafruit / Adafruit-Feather-ESP8266-HUZZAH-PCB
  PCB files for the Adafruit Feather ESP8266 HUZZAH
  ☆44Updated 4 years ago
• mike-rankin / ESP_trINKet
  ☆71Updated 7 years ago
• TCWORLD / ATTinyCore
  ATTiny Core for Arduino 1.0+
  ☆88Updated 8 years ago
• adafruit / Adafruit_ProTrinket_Bootloader
  ☆24Updated 10 years ago
• todbot / SoftI2CMaster
  Software I2C / TWI library for Arduino allows any two pins to be SDA & SCL
  ☆76Updated 5 years ago
• danasf / attiny_pixel_switch
  WS2811/12 patterns for ATtiny85 + switch!
  ☆56Updated 11 years ago
• tricorderproject / arducordermini
  Arducorder Mini
  ☆128Updated 10 years ago
• DangerousPrototypes / Eagle_Part_Library
  ☆38Updated 5 years ago
• Seeed-Studio / fritzing_parts
  Fritzing parts and SVG files of Seeed Hardware
  ☆58Updated 2 weeks ago
• acrobotic / Ai_Hub_USB
  PCB design files (EAGLE) for a 4-port USB Hub using the FE1.1s IC.
  ☆20Updated 9 years ago
• DPHAD / COGS-for-Makers
  A simple Cost-of-Goods Calculator for Makers to help identify what time and costs make up a product.
  ☆17Updated 7 years ago
• adafruit / Standalone-Arduino-AVR-ISP-programmer
  A standalone programmer for mass-programming AVR chips
  ☆86Updated 4 years ago
• fredlllll / FredUtil-Arduino
  snippets that were too small for their own library
  ☆38Updated 6 years ago
• bwshockley / Minifigure-SAMD21E
  SAMD21E based Minifigure shaped development board.
  ☆44Updated 6 years ago
• sparkfun / SAMD21_Mini_Breakout
  A miniature SAM21G Breakout, in the form factor/pin-out of a Pro Mini.
  ☆42Updated 2 years ago
• mike-rankin / SAMD21G18A_Sensor_Board
  SAMD21G18A Sensor Board
  ☆15Updated 8 years ago
• mike-rankin / ESP32_CoinCell_Color_TFT
  Based off of the CoinCell Board but with more sensors and a 80x160 ST7735 color tft lcd
  ☆57Updated 3 years ago
• drewfish / arduino-ZeroRegs
  print out the low-level configuration registers for the Arduino Zero (and similar boards)
  ☆24Updated 5 years ago
• adafruit / Adafruit_TinyFlash
  Barebones Winbond SPI flash library for Arduino and Trinket
  ☆30Updated 4 years ago
• Miceuz / triac-bloc
  An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
  ☆50Updated 5 years ago
• bwshockley / Mini-SAM
  Respository for Mini Sam PCB board using a SAMD51.
  ☆71Updated 5 years ago