Alternatives and similar repositories for eagle

Users that are interested in eagle are comparing it to the libraries listed below

• watterott / Eagle-Libs
  Part Libraries for CadSoft/Autodesk Eagle
  ☆27Updated 5 years ago
• danasf / attiny_pixel_switch
  WS2811/12 patterns for ATtiny85 + switch!
  ☆56Updated 11 years ago
• Miceuz / triac-bloc
  An universal power block based on triac. In essence this is a solid state relay with some bells and whistles
  ☆50Updated 5 years ago
• sparkfun / Arduino_Pro_Mini_328
  SparkFun's Arduino Pro Mini 328 is a bare bones super small Arduino compatible development board.
  ☆103Updated 6 years ago
• TCWORLD / ATTinyCore
  ATTiny Core for Arduino 1.0+
  ☆87Updated 8 years ago
• adafruit / Adafruit-PowerBoost-500-Charger-PCB
  PCB files for Adafruit PowerBoost 500C
  ☆22Updated 6 years ago
• adafruit / Standalone-Arduino-AVR-ISP-programmer
  A standalone programmer for mass-programming AVR chips
  ☆88Updated 4 years ago
• GravCorp / DayOLED_SSD1306
  A library for the Arduino Due, for using SSD1306 OLED screens, with DMA for high speed.
  ☆40Updated 10 years ago
• lhartmann / esp_rtos_reprap
  Stepper motor controller based on FreeRTOS for the ESP8266.
  ☆64Updated 9 years ago
• nsayer / Toast-R-Reflow
  Toaster oven reflow soldering controller
  ☆28Updated 7 years ago
• adafruit / Adafruit-METRO-328-PCB
  PCB files for the Adafruit METRO 328
  ☆44Updated 2 years ago
• septillion-git / QC2Control
  Set the voltage of a Quick Charge 2.0 source via the Arduino.
  ☆68Updated 8 years ago
• mike-rankin / ESP_trINKet
  ☆71Updated 7 years ago
• asukiaaa / esp32bb
  A KiCad project for esp-wroom-32 and breadboard.
  ☆53Updated 7 years ago
• adafruit / arduino-board-index
  Adafruit Package Lists for the Arduino v1.6.4+ Board Manager
  ☆41Updated this week
• adafruit / Adafruit-NeoPixel-8x8-Matrix
  PCB files for Adafruit NeoPixel 8x8 Matrix
  ☆21Updated 6 years ago
• adafruit / Adafruit_RA8875
  Adafruit Arduino library driver for the RA8875 TFT driver
  ☆74Updated 2 years ago
• marcmerlin / IoTuz
  IoTuz driver for ESP32 based LCA 2017 IoTuz board, also can be used as a demo on an espressif WROVER
  ☆30Updated 8 years ago
• todbot / arduino-i2c-scanner
  Simple Arduino I2C scanner as described at http://todbot.com/blog/2009/11/29/i2cscanner-pde-arduino-as-i2c-bus-scanner/
  ☆76Updated 10 years ago
• CainZ / V.KEL-GPS
  ☆24Updated 10 years ago
• adafruit / Adafruit-NeoPixel-Ring
  PCB files for Adafruit NeoPixel Rings
  ☆49Updated 6 years ago
• cmonr / Eagle-Libraries
  A collection of Eagle Libraries I've created and use in projects
  ☆77Updated 4 years ago
• sparkfun / Lipo_Fuel_Gauge
  SparkFun LiPo Fuel Gauge
  ☆26Updated 2 years ago
• sparkfun / MicroView
  The MicroView is a chip-sized Arduino with a built-in OLED, available from SparkFun Electronics
  ☆58Updated 7 months ago
• Bodmer / TFT_ILI9341_ESP
  TFT ILI9341 library for ESP8266 and NodeMCU
  ☆31Updated 8 years ago
• adafruit / Adafruit_FeatherOLED
  Helper class to work with 128x32 OLED displays on Adafruit Feathers
  ☆27Updated 2 years ago
• sparkfun / Tiny-AVR-Programmer
  Hardware files for the Tiny AVR Programmer
  ☆76Updated 6 years ago
• adafruit / Adafruit-Feather-M0-Basic-Proto-PCB
  PCB files for the Adafruit Feather M0 Basic Proto
  ☆36Updated 3 years ago
• BLavery / SAMD21-M0-Mini
  Notes on using the Chinese "SAMD21-M0-Mini" board
  ☆59Updated 2 months ago
• adafruit / Adafruit-Trinket-PCB
  PCB files for Adafruit Trinket 3V & 5V
  ☆36Updated 4 years ago