Alternatives and similar repositories for vwcdavr

Users that are interested in vwcdavr are comparing it to the libraries listed below

• ibanezgomez / FISBlocks
  Device based on Arduino to play with VAG KWP1281
  ☆120Updated 6 years ago
• nyetwurk / ME7Sum
  Checksum/CRC checker/corrector for Motronic ME7.1 firmware images. Download binaries here:
  ☆84Updated 3 months ago
• autowp / CANreader
  Android CAN client
  ☆61Updated 7 years ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆83Updated 10 years ago
• tomaskovacik / arduino
  ☆39Updated 4 years ago
• Hell-Fire / WidebandO2
  An Arduino sketch for controlling a Bosch LSU 4.9 Wideband Lambda sensor with minimal parts
  ☆79Updated 11 years ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆112Updated 4 years ago
• iwanders / OBD9141
  A class to read an ISO 9141-2 port found in car diagnostic OBD-II ports.
  ☆287Updated 4 months ago
• turboat / eepromtool
  ☆49Updated 2 years ago
• vtl / volvo-ddd
  VOLVO Driver Distraction Display :)
  ☆66Updated 3 years ago
• tomaskovacik / vwcdpic
  This is my personal fork of k9spud vwcdpic project
  ☆28Updated last year
• aster94 / Keyword-Protocol-2000
  The KWP2000 is a communications protocol used for on-board vehicle diagnostics systems (OBD) by Suzuki (SDS), Kawasaki (KDS), Yamaha (YDS…
  ☆261Updated 2 years ago
• mkirbst / lupo-gti-tripcomputer-kw1281
  A tripcomputer for VW Lupo GTI using kw1281 protocoll
  ☆27Updated 8 years ago
• alexandreblin / arduino-can-reader
  An Arduino sketch to read data from a CAN bus
  ☆96Updated 6 years ago
• zapta / linbus
  An Arduino based LINBUS stack and signal interceptor/injector.
  ☆192Updated 6 years ago
• Autohome2 / dxControl-Gears
  ☆22Updated 7 years ago
• angelovAlex / can-bus-w211
  ☆38Updated 8 years ago
• autowp / arduino-canhacker
  CanHacker (lawicel) CAN adapter on Arduino + MCP2515
  ☆428Updated last year
• arildlangseid / vw_t4_tcu_temp_to_fis
  Arduino project to readout Automatic Transmission Fluid Temp and write to FIS display
  ☆26Updated 2 years ago
• seishuku / teensycanbusdisplay
  Jetta TDI aux display
  ☆18Updated 5 years ago
• autowp / autowp.github.io
  Peugeot Citroën CAN bus
  ☆87Updated 2 years ago
• oelprinz-org / BL49SP
  Wideband Lambda Controller with Bosch CJ125
  ☆39Updated last year
• vtl / volvo-kenwood
  Volvo steering wheel buttons interface for Kenwood head unit
  ☆28Updated 9 years ago
• HeinrichG-V12 / E65_ReverseEngineering
  ☆42Updated 3 years ago
• morcibacsi / PSAVanCanBridge
  VAN - CAN protocol bridge (V2C) for cars made by PSA Group (Peugeot, Citroen)
  ☆135Updated 3 weeks ago
• akpc806a / CAN_Bridge
  CAN Bus Bridge / Smart Repeater
  ☆37Updated 4 months ago
• TheBigBadWolfClub / GTTurboEcu
  Arduino ODBII ELM327 Emulator - Allows Arduino to act as an OBD2 ELM327 device and responde to PID requests
  ☆64Updated last year
• JacekGreniger / stm32-vagcanlogger
  VAGCANLOGGER - KW1281 & VW TP 2.0
  ☆33Updated 11 years ago
• adamforbes92 / FISCuntrol
  FIS Control for the masses.
  ☆48Updated 6 years ago
• morcibacsi / PSASteeringWheelAdapter
  ESP32 based steering wheel adapter for Peugeot and Citroen cars
  ☆36Updated 5 years ago