Alternatives and similar repositories for openport-logcfg

Users that are interested in openport-logcfg are comparing it to the libraries listed below

• Merp / MerpMod
  MerpMod!
  ☆40Updated 7 years ago
• dschultzca / DefinitionTools
  Tools to assist in the creation of definitions
  ☆13Updated last year
• beyerch / DHP_Kepler
  Automotive Vehicle Interface Hardware (CAN / VPW / A2D / BT 4.1 / USB / SDCARD)
  ☆39Updated 7 years ago
• TD-D / SubaruDefs
  Subaru ECU Definitions
  ☆110Updated last year
• collin80 / GVRET
  Generalized Vehicle Reverse Engineering Tool - firmware for Arduino Due based boards
  ☆107Updated 7 years ago
• Merp / SharpTune
  SharpTune
  ☆31Updated 4 years ago
• andrew867 / GMLAN
  A simple VB6 program to test the GMLAN.
  ☆15Updated 12 years ago
• nyetwurk / ecuxplot
  Tool for plotting ECU logs (ME7L, VCDS, OBDLink, SimosTools, CobbAP, M-Tuner and more!)
  ☆60Updated 2 weeks ago
• hackingvolvo / SardineCAN-Arduino
  Arduino firmware for Sardine CAN (Open Source J2534 device)
  ☆88Updated 10 years ago
• arildlangseid / vw_t4_tcu_temp_to_fis
  Arduino project to readout Automatic Transmission Fluid Temp and write to FIS display
  ☆26Updated 2 years ago
• joukoy / gm-checksum-plugins
  Tunerpro checksum plugins for GM PCM files
  ☆51Updated last year
• Snipesy / Cruze
  Unlocking the Cruze, one byte at a time.
  ☆15Updated 3 years ago
• andrewkabai / universal_can_filter
  ☆26Updated 5 years ago
• MEAT-Inc / Fulcrum
  Fulcrum is the ultimate J2534 DLL Shim written in C++ which is able to pipe data out from the native calls to any other location for supe…
  ☆38Updated 10 months ago
• rnd-ash / ultimate_nag52
  An open source TCM for Daimlers 722.6 gearbox. Resource repository
  ☆122Updated last year
• Afterglow / arduino-gmlan
  Talk and listen to GMLAN communications in my Vectra-C (03 plate)
  ☆32Updated 13 years ago
• garymeg / CanBus_Hacking
  Hacking a Vehicles CanBus
  ☆25Updated 3 years ago
• mjuhanne / OVMS-SWCAN
  SWCAN add-on board for Open Vehicle Monitoring System
  ☆30Updated 6 years ago
• LegacyNsfw / 12593358
  Reverse engineering GM's powertrain control module software from my Corvette
  ☆11Updated 5 years ago
• jazdw / vag-blocks
  Reads VW/Audi specific measuring blocks over an OBD-II port using an ELM327 adapter
  ☆115Updated 5 years ago
• AndyWhittaker / FreeScan
  ALDL Scan Tool for various GM based vehicles
  ☆34Updated 5 years ago
• fenugrec / nissutils
  ☆54Updated 7 months ago
• openvehicles / CAN-RE-Tool
  A reverse engineering tool for systems based on CAN bus communications
  ☆85Updated 4 years ago
• 360trev / ME7RomTool_Ferrari
  Bosch ME7.3H4 RomTool for Ferrari 360's
  ☆38Updated 7 years ago
• LegacyNsfw / PcmHacks
  This project has moved to https://github.com/PcmHammer/PcmHammer/
  ☆187Updated 10 months ago
• synman / AdaptiveTuner
  Adaptronic Select ECU Tuning Aid
  ☆28Updated 10 years ago
• rpkish / Subduino-SSM
  Subaru Select Monitor to Canbus adapter
  ☆28Updated 7 years ago
• vimsh / mafscaling
  Car ECU logs processing: MAF scaling/rescaling, Table rescaling, Throttle Maps, Load / Injector Pulse Width / IAT compensation, Speed Den…
  ☆84Updated 2 years ago
• BiggRanger / CANBUS-Bridge
  A tool to determine the source of CAN IDs, and filter CAN packets.
  ☆14Updated 5 years ago
• macchina / m2-hardware
  Designs for the Macchina M2
  ☆98Updated 5 years ago